① Align the interface of the Wi-Fi Plug07 with the inverter and plug it in tightly.
② Confirm the status of the LED indicator (When you saw the green LED light turn on from the shell, showing the normal working status)
2.1 Download APP and Wi-Fi connection
① Scan the QR Code from the cover of this guideline and download the APP.
② Select the same number of Wi-Fi Plug07 PN to connect on your phone WLAN. (Initial Password:12345678)
2.2 Wi-Fi Config
① Open the APP, Tap the Wi-Fi Config button to enter this page.
② Then tap the Network Setting button.
2.3 Network Setting
① According to the prompts, type in the information to finish the network setting.
② After the Wi-Fi Plug07 is restarted, reconnect the Wi-Fi which is connected by step 2.1.
3.1 Create Account
① Open the APP, tap the Register button.
② According to the prompt information, complete creating an account.
3.2 Add Datalogger
① Login to the account and click the list button on the bottom of the home page.
② Tap the “＋” button on the top-right corner of the list page.
③ Scan the datalogger PN on the Wi-Fi Plug07, or input it manually.
④ According to the prompts, type in the information to finish adding the datalogger.
| type | POW 300 | POW 500 |
| Rated Output Power | 300W | 500W |
| DC Input | ||
| DC/Solar/Car Charging Port | 10.8 - 23.5V 3A | 10.8 - 24V 5A |
| Type-C + DC Charging Port | / | PD100W + DC100w |
| AC Output | ||
| Output Waveform | Pure Sine Wave | Pure Sine Wave |
| Rated Output Voltage | 220V. | 220V |
| Output Frequency | 50/60Hz | 50/60Hz |
| Overload Capacity | 340 - 360W | / |
| Peak Power | / | 1000W |
| Battery | ||
| Nominal Voltage | 12.8V | 19.2V |
| Battery Electricity | 320Wh | 518Wh |
| Nominal Capacity | 25000mAh | 27000mAh |
| Cycle Life | 2000 times | 2000 times |
| Charging Current | 4.8A (Recommended value); 12A MAX | / |
| Discharging Current | 24A (Recommended value); 38A MAX | / |
| DC Output | ||
| Type-C1 Output | PD60W: 5V3A/9V3A/12V3A/15V3A/20V3A | PD24W |
| DC Output Voltage Range | 12 - 14.4V | / |
| Type-C2 Output | PD30W: 5V3A/9V3A/12V2.5A/15V3A/20V1.5A | PD100W |
| USB*2 Output | QC18W | QC18W |
| DC2/DC3/Car Charger Output | 12-13.95V 10A | 12V 10A |
| Max DC Output | 168W | / |
| General Specification | ||
| Charging Temperature | 0℃ - 40℃ | 0℃ - 40℃ |
| Discharging Temperature | -5℃ - 40℃ | -10℃ - 40℃ |
| Dimension | 240*158*138mm | 245*200*182mm |
| Weight | 6.5kg | 6.5kg |
| Question: | Is there a way to fix the battery state of charge, it is reading incorrectly? |
| Answer: | disconnect all the wiring. wait about 20 mins, wire your battery to inverter again. |
- Comment
the datalogger address does not work
- Comment
B09ND8W3JV
- Administrator reply
- Hello, our service will contact u soon.
- Comment
the datalogger address does not work
- Administrator reply
- Our service will contact u soon
- Comment
- Administrator reply
- Our service will contact u soon
- Comment
Our company makes delivery all over the world
We only offer quality goods with higher cost performance
You have 30 days to test your purchase
© 2017 - 2023 PowMr. All Rights Reserved.
