Powmr 14.4KW 230V AC System 48V DC 80A All In One Inverter Charger Built-In 80A MPPT Solar Charge Controller Max PV 500V Off-Grid Inverter With Parallel 6 Units 2 MPP Tracker

Free shipping

Powmr 14.4KW 230V AC System 48V DC 80A All In One Inverter Charger Built-In 80A MPPT Solar Charge Controller Max PV 500V Off-Grid Inverter With Parallel 6 Units 2 MPP Tracker

2PCS 7.2KW Solar Inverter charger.

INTRODUCTION

This is a multi-function inverter, combining functions of all in one inverter, solar charger, and battery charger to offer uninterruptible power support in a single package. The comprehensive LCD display offers user-configurable and easy-accessible button operations such as battery charging current, AC or solar charging priority, and acceptable input voltage based on different applications.

Features

  • Brand: Powmr
  • Product Model: POW-Max-7.2KW-48V-230V
  • Pure sine wave inverter
  • Configurable color with the built-in RGB LED bar
  • Built-in Wi-Fi for mobile monitoring (APP is required)
  • Supports USB On-the-Go function
  • Built-in anti-dusk kit
  • Detachable LCD control module with multiple communication ports for BMS (RS485, CAN-BUS, RS232)
  • Configurable input voltage ranges for home appliances and personal computers via the LCD control panel
  • Configurable AC/PV output usage timer and prioritization
  • Configurable AC/Solar charger priority via the LCD control panel
  • Configurable battery charging current based on applications via the LCD control panel
  • Compatible with utility mains or generator power
  • Auto restart while AC is recovering
  • Overload / Over temperature / short circuit protection
  • Smart battery charger design for optimized battery performance
  • Cold start function

Reminder: Only for US users

1. In the mains bypass mode, the device cannot be connected to two-phase 220V AC power, that is, L1-L2 cannot be connected to L-N.
2. In 48V inverter mode, after the device is connected to two-phase 220V, please do not select the mains priority as the output priority, so as to avoid potential safety hazards for the device.
3. Do not connect the AC output end of the device to an autotransformer, so as not to affect the normal service life of the device.

Basic System Architecture

The following illustration shows the basic application for this unit. It also includes the following devices to have a complete running system:

  • Generator or Utility mains
  • PV modules

Consult with your system integrator for other possible system architectures depending on your requirements.

This inverter can power various appliances in-home or office environment, including motor-type appliances such as tube lights, fans, refrigerators, and air conditioners

Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), batteries, and the utility. When the MPP input voltage of PV modules is within an acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge the battery. Galvanic isolation was designed between PV/DC and AC output so that users could connect any type of PV array to this Hybrid inverter. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter.

Product Overview

  1. LCD display
  2. Status indicator
  3. Charging indicator
  4. Fault indicator
  5. Function buttons
  6. Power on/off switch
  7. AC input connectors and Display Panel section for details) and USB function
  8. AC output connectors (Load connection)
  9. PV connectors the details)
  10. Battery connectors
  11. Remote LCD module communication
  12. Current sharing port
  13. Parallel communication port
  14. Dry contact
  15. USB port as USB communication port and USB function port
  16. BMS communication port: CAN, RS-485 or RS-232
  17. Output source indicators (refer to OPERATION/Operation and Display Panel section for details) and USB function setting reminder (refer to OPERATION/Function Setting for the details)
  18. RS-232 communication port
  19. RGB LED bar (refer to LCD Setting section for the details)

SAFETY INSTRUCTIONS

WARNING: This chapter contains important safety and operating instructions. Read and keep this manual for future reference.

  1. Before using the unit, read all instructions and cautionary markings on the unit, the batteries, and all appropriate sections of this manual.
  2. CAUTION --To reduce the risk of injury, charge only deep-cycle lead-acid type rechargeable batteries. Other types of batteries may burst, causing personal injury and damage.
  3. Do not disassemble the unit. Take it to a qualified service center when service or repair is required. Incorrect re-assembly may result in a risk of electric shock or fire.
  4. To reduce the risk of electric shock, disconnect all wirings before attempting any maintenance or cleaning. Turning off the unit will not reduce this risk.
  5. CAUTION – Only qualified personnel can install this device with a battery.
  6. NEVER charge a frozen battery.
  7. For optimum operation of this inverter/charger, please follow the required spec to select the appropriate cable size. It’s very important to correctly operate this inverter/charger.
type  POW 300 POW 500
Rated Output Power 300W 500W
DC Input
DC/Solar/Car Charging Port 10.8 - 23.5V 3A 10.8 - 24V 5A
Type-C + DC Charging Port / PD100W + DC100w
AC Output
Output Waveform Pure Sine Wave Pure Sine Wave
Rated Output Voltage 220V. 220V
Output Frequency 50/60Hz 50/60Hz
Overload Capacity 340 - 360W /
Peak Power / 1000W
Battery
Nominal Voltage 12.8V 19.2V
Battery Electricity 320Wh 518Wh
Nominal Capacity 25000mAh 27000mAh
Cycle Life 2000 times 2000 times
Charging Current 4.8A (Recommended value); 12A MAX /
Discharging Current 24A (Recommended value); 38A MAX /
DC Output
Type-C1 Output PD60W: 5V3A/9V3A/12V3A/15V3A/20V3A PD24W
DC Output Voltage Range 12 - 14.4V /
Type-C2 Output PD30W: 5V3A/9V3A/12V2.5A/15V3A/20V1.5A PD100W
USB*2 Output QC18W QC18W
DC2/DC3/Car Charger Output 12-13.95V 10A 12V 10A
Max DC Output 168W /
General Specification
Charging Temperature 0℃ - 40℃ 0℃ - 40℃
Discharging Temperature -5℃ - 40℃ -10℃ - 40℃
Dimension 240*158*138mm 245*200*182mm
Weight 6.5kg 6.5kg

Brand information
Brand :
Growatt
Battery Information for inverters and controllers
Lithium Battery Activation :
  • No Lithium Batteries Activation
Battery Voltage :
  • 48V
Battery Type :
  • Lifepo4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • Gel Batteries
  • Lead-acid Batteries
  • AGM Batteries
Inverter Information
Inverter Type:
  • High frequency Inverters
Load workout with Battery:
Yes
Parallel Function:
Yes
Phase:
  • Single Phase
  • Parallel Single for Three Phase
Split Phase:
No
AC output:
  • 230Vac±5%
Rated Load Power:
  • 7200W
Solar Panel Information for inverters
Max Panel Input Volt :
  • 450V-500V
PV Terminal Charging Mode:
  • build-in MPPT Solar Charge Controller
Max Solar Panel Input Power:
  • 8000W
Charging Current Information for inverters
AC Charging Current:
  • 80 Amps
PV Charging Current:
  • 80amps
AC+PV Charging Current:
  • 80Amps
Accessories information for inverters
Wifi/Bluetooth Module:
  • Wifi Module(Optional)
  • Wifi Module Inside
Other Information
Warehouse:
  • AUS Warehouse
  • GER Warehouse
  • RUS Warehouse
  • USA Warehouse
Find similar


5 out of 5
Reviews: 1
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 star
0%
Maurice Brinkman
Azerbaijan
Comment
Hi I have a 220volt powersupply of 6a do you have a charger that van run on just 6a (1250 wat)
Administrator reply
Our service will contact u soon.

POW-MAX-7.2KW-48V-230V*2
$2,64066
In stock
+ −
Add to wish list Compare
Write a review
Ask a question
Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • — PowMr Everywhere 
    Wholesale
    BrandGrowatt Lithium Battery Activation No Lithium Batteries Activation Battery Voltage48V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries Inverter TypeHigh frequency Inverters Load workout with Battery Parallel Function PhaseSingle Phase, Parallel Single for Three Phase AC output230Vac±5% Rated Load Power7200W Max Panel Input Volt450V-500V PV Terminal Charging Modebuild-in MPPT Solar Charge Controller Max Solar Panel Input Power8000W AC Charging Current80 Amps PV Charging Current80amps AC+PV Charging Current80Amps Wifi/Bluetooth ModuleWifi Module(Optional), Wifi Module Inside WarehouseUSA Warehouse, RUS Warehouse, GER Warehouse, AUS Warehouse

    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase