EPEVER 3000Watt DC 24V AC Output 110V Solar Power Inverters IP3000-21-Plus(T)

Write a review
Ask a question
IP3000-21-Plus(T)
$58999
In stock
+
Why PowMr?
  • — 24 months warranty
  • — Fast Delivery
  • — Free Shipping 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
Wholesale
BrandEPever Battery Voltage24V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, AGM Batteries Inverter TypeHigh frequency Inverters AC output110/120Vac±5% Rated Load Power3000W

2

IPower-Plus Power Inverter is a new generation of pure sine wave inverter compatible with the lithium battery system.

Overview

IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS 
(Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The inverter selects key components with a high power density and long lifespan to 
provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV 
power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.

Features:  

Completely electrically isolated design for input and output
Full digital double closed-loop control 
Excellent EMC characteristic, widely applied to higher quality power system
Advanced SPWM technology and pure sine wave output.
Input surge current suppression technology, applying to the lithium battery system
Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
High power density and high-quality components to ensure the reliability
Output power factor up to 1
Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency
Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating
Air cooling controlled by temperature and load
Rotatable LCD meter to simplify the system wiring
Friendly LCD meter to simply monitor and parameter configure
Remote control by the phone Apps and PC software 
Configurable output voltage and output frequency①
Charging mobile phones, DC fans, and other electrical equipment by the USB port② 
Support a variety of options by connecting with the RS485 com. port③
External switch contact design to allow remote control
IEC62109, EN61000, RoHS approved

① Configuring the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.
② This function is unavailable for inverters with 48V input voltage.
③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.

g

d

3000W Pure Sine Wave Inverter 24V to 110V Parameters

Continuous output power3000W@35℃@Rated input voltage
Surge power6000W@5S
Surge current when power on<100A
Output voltage110VAC(±3%); 120VAC(-7%~+3%)
Output frequency50/60Hz±0.2%
Output wavePure Sine Wave
Output distortion THDTHD≤5%(Resistive load)
Load power factor0.2~1(VA≤output continuous power)
Rated input voltage24VDC
Input voltage range21.6~32.0VDC
No-load current<1A
USB output5VDC/Max.1A
RS485 com. port5VDC/ 200mA
Dimension521×274×148mm
Mounting dimension495×145mm (Mounting Holes: Φ6mm)
Net WeightNet Weight 8kg

A

  • Battery wire size: 25mm2/3AWG*2
  • Battery Circuit breaker: DC-100A(2P in parallel)
  • AC Wire size: 6mm2/10AWG
  • AC Circuit breaker: AC/2P—50A
  • Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
  • Charging mobile phones, DC fans, and other electrical equipment by the USB port

Note:

  • It is recommended to connect the inverter DC input terminal to the battery terminal directly. DO NOT connect it to the charge source terminal. Otherwise, the charging voltage spikes of the charge source may cause over-voltage protection of the inverter.
  • The AC loads shall be determined by the continuous output power of the inverter. The AC load's surge power must be lower than the instantaneous surge power of the inverter, or the inverter will be damaged.
  • Set the inverter switch to OFF status before wiring.
  • During wiring, do not close the circuit breaker or fuse. Ensure the leads of "+" and "-" poles are polarity correctly.
  • A fuse whose current is 2 to 2.5 times the inverter's rated current must be installed on the battery end. Distance between them is not more than 150mm.
  • When supplying power for different loads, it is recommended to turn on the load with a large impulse current. And then turn on the load with a smaller impulse current after the load output is stable.)
  • If the fault indicator flashes red and the buzzer alarms after powering on the inverter, please immediately turn off the load and the inverter. Clear the faults according to Chapter 8 Troubleshooting.
Parameters IP3000-21-Plus(T) IP3000-12-Plus(T)
Continuous output power 3000W@35@Rated input voltage
Surge power 6000W@5S 6000W@5S
Surge current when power on 100A 100A
Output voltage 110VAC(±3%); 220VAC(±3%);
120VAC(-7%~+3%) 230VAC(-7%~+3%)
Output frequency 50/60Hz±0.2%
Output wave Pure Sine Wave
Output distortion THD THD≤4%(Resistive load) THD≤3%(Resistive load)
Load power factor 0.2~1(VA≤output continuous power)
Rated input voltage 24VDC 12VDC
Input voltage range 21.6~32.0VDC 10.8~16.0VDC
Rated output efficiency 87% 87%
Max. output efficiency 91.5% (30%loads) 94% (30% loads)
Idle current 0.15A 0.2A
No-load current 1A 1.6A@12V
USB output 5VDC/Max.1A 5VDC/Max.1A
RS485 com. port 5VDC/ 200mA
Mechanical parameters
Input terminal M6 M10
Dimension (Length x Width x Height) 521×274×148mm 557×231.5×123mm
Mounting dimension 495×145mm 532×145mm
Mounting Holes Φ6mm Φ6mm
Net Weight 8kg 10.5kg
Working temperature -20~+60(Refer to the Reduced capacity curve)
Relative humidity < 95%(N.C.)
Enclosure IP20
Altitude 5000m (If the altitude is more than 1000 meters, the rated power will be reduced according to GB7260.)
 It means the rated output efficiency when the load power is continuous output power under the rated DC input voltage. (25 )
 It means the max. output efficiency when the inverter is connected with different loads under the rated DC input voltage.
Brand information
Brand :
EPever
Battery Information for inverters and controllers
Battery Voltage :
  • 24V
Battery Type :
  • Lifepo4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • Gel Batteries
  • AGM Batteries
Inverter Information
Inverter Type:
  • High frequency Inverters
Load workout with Battery:
No
Parallel Function:
No
Split Phase:
No
AC output:
  • 110/120Vac±5%
Rated Load Power:
  • 3000W
Find similar


No reviews found

2

IPower-Plus Power Inverter is a new generation of pure sine wave inverter compatible with the lithium battery system.

This new pure sine inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS (Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The 24V inverter selects key components with a high power density and long lifespan to provide a stable and reliable power g. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.

Features:

  • Advanced SPWM technology and pure sine wave output.Completely electrically isolated design for input and output
  • Excellent EMC characteristic, widely applied to higher quality power system
  • Input surge current suppression technology, applying to the lithium battery system
  • Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
  • Output power factor up to 1
  • Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency
  • Air cooling controlled by temperature and load
  • Rotatable LCD meter, to simply monitor and parameter configure.
  • Remote control by the phone Apps and PC software
  • Configurable output voltage and output frequency (Configuring the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.)
  • Charging mobile phones, DC fans, and other electrical equipment by the USB port
  • External switch contact design to allow remote control
  • Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating. IEC62109, EN61000, RoHS approved

g

d

3000W Pure Sine Wave Inverter 24V to 110V Parameters

>td >Load power factor

Continuous output power3000W@35℃@Rated input voltage
Surge power6000W@5S
Surge current when power on<100A
Output voltage110VAC(±3%); 120VAC(-7%~+3%)
Output frequency50/60Hz±0.2>#/td###
Output wavePure Sine Wave
Output distortion THD
0.2~1(VA≤output continuous power)
Rated input voltage24VDC
Input voltage range21.6~32.0VDC
No-load current<1A
USB output5VDC/Max.1A
RS485 com. port5VDC/ 200mA
Dimension521×274×148mm
Mounting dimension495×145mm (Mounting Holes: Φ6mm)
Net WeightNet Weight 8kg

A

  • Battery wire size: 25mm2/3AWG*2
  • Battery Circuit breaker: DC-100A(2P in parallel)
  • AC Wire size: 6mm2/10AWG
  • AC Circuit breaker: AC/2P—50A
  • Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
  • Charging mobile phones, DC fans, and other electrical equipment by the USB port

Note:

  • It is recommended to connect the inverter DC input terminal to the battery terminal directly. DO NOT connect it to the charge source terminal. Otherwise, the charging voltage spikes of the charge source may cause over-voltage protection of the inverter.
  • >span class="a-list-item">Set the inverter switch to OFF status before wiring.
  • During wiring, do not close the circuit breaker or fuse. Ensure the leads of "+" and "-" poles are polarity correctly.
  • A fuse whose current is 2 to 2.5 times the inverter's rated current must be installed on the battery end. Distance between them is not more than 150mm.
  • When supplying power for different loads, it is recommended to turn on the load with a large impulse current. And then turn on the load with a smaller impulse current after the load output is stable.)
  • If the fault indicator flashes red and the buzzer alarms after powering on the inverter, please immediately turn off the load and the inverter. Clear the faults according to Chapter 8 Troubleshooting.
You May Also Like
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We only offer quality goods with higher cost performance

Returns within 30 days

You have 30 days to test your purchase