IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS (Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The power inverter selects key components with a high power density and long lifespan to provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.
① Configuring the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.
② This function is unavailable for inverters with 48V input voltage.
③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.
| Parameters | IP1000-11-Plus(N) |
| Continuous output power | 1000W@35℃@Rated input voltage |
| Surge power | 2000W@5S |
| Surge current when power on | ＜100A |
| Output voltage | 110VAC(±3%); |
| 120VAC(-7%~+3%) | |
| Output frequency | 50/60Hz±0.2% |
| Output wave | Pure Sine Wave |
| Output distortion THD | THD≤4%（Resistive load） |
| Load power factor | 0.2~1(VA≤continuous output power) |
| Rated input voltage | 12VDC |
| Input voltage range | 10.8~16.0VDC |
| Rated output efficiency① | ＞87% |
| Max. output efficiency② | ＞92% (40% loads) |
| Idle current | ＜0.2A |
| No-load current | ＜0.8A@12V |
| USB output | 5VDC/Max.1A |
| RS485 com. port | 5VDC/200mA |
| Mechanical parameters | |
| Input terminal | M6 |
| Dimension(Length x Width x Height) | 371×231.5×123mm |
| Mounting dimension | 345×145mm |
| Mounting Holes | Φ6mm |
| Net Weight | 5.8kg |
| Working temperature | -20℃~+60℃(Refer to the Reduced capacity curve) |
| Storage temperature | -35℃~ +70℃ |
| Relative humidity | < 95%(N.C.) |
| Enclosure | IP20 |
| Altitude | ＜5000m (If the altitude is more than 1000 meters, the rated power will be reduced according to GB7260.) |
| ① It means the rated output efficiency when the load power is continuous output power under the rated DC input voltage. (25℃ )
② It means the max. output efficiency when the inverter is connected with different loads under the rated DC input voltage. | |
Overview:IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS (Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load mpact. The inverter selects key components with a high power density and long lifespan to provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system ousehold power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.
IP1000-11-Plus(T) 1000W 12V/110V
IP1500-11-Plus(T) 1500W 12V/110V
IP1500-12-Plus(T) 1500W 12V/220V
IP2000-21-Plus(T) 2000W 24V/110V
IP2000-22-Plus(T) 2000W 24V/220V
IP3000-12-Plus(T) 3000W 12V/220V
IP3000-21-Plus(T) 3000W 24V/110V
IP3000-22-Plus(T) 3000W 24V/220V
Features:
Completely electrically isolated design for input and output Full digital double closed-loop control Excellent EMC characteristic, widely applied to higher quality power system Advanced SPWM technology and pure sine wave output. Input surge current suppression technology, applying to the lithium battery system Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc. High power density and high-quality components to ensure the reliability Output power factor up to 1 Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency
Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating Air cooling controlled by temperature and load Rotatable LCD meter to simplify the system wiring Friendly LCD meter to simply monitor and parameter configure Remote control by the phone Apps and PC software Configurable output voltage and output frequency① Charging mobile phones, DC fans, and other electrical equipment by the USB port② Support a variety of options by connecting with the RS485 com. port③ External switch contact design to allow remote control
IEC62109, EN61000, RoHS approved
① Configuring the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software. ② This function is unavailable for inverters with 48V input voltage. ③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.
Specification
| If you want to know more models, pls click here to get the manual | ||||
| Parameters | IP1000-11-Plus | IP1000-12-Plus | IP1000-21-Plus | IP1000-22-Plus |
| Continuous output power | 1000W@35℃@Rated input voltage | |||
| Surge power | 2000W@5S | |||
| Surge current when power on | ＜100A | |||
| Output voltage | 110VAC(±3%); 120VAC(-7%~+3%) | 220VAC(±3%); 230VAC(-7%~+3%) | 110VAC(±3%); 120VAC(-7%~+3%) | 220VAC(±3%); 230VAC(-7%~+3%) |
| Output frequency | 50/60Hz±0.2>#/span### | |||
| Output wave | Pure Sine Wave | |||
| Output distortion THD | THD≤4%(Resistive load) | THD≤3%(Resistive load) | THD≤3%(Resistive load) | THD≤3%(Resistive load) |
| Load power factor | 0.2~1(VA≤continuous output power) | |||
| Rated input voltage | 12VDC | 24VDC | ||
| Input voltage range | 10.8~16.0VDC | 21.6~32.0VDC | ||
| Rated output efficiency① | ＞87% | ＞89% | ＞90% | ＞90% |
| Max. output efficiency② | ＞92% (40% loads) | ＞93% (40% loads) | ＞92.5% (30% loads) | ＞93%(30% loads) |
| Idle current | ＜0.2A | |||
| No-load current | ＜0.8A | ＜1.1A | ＜0.6A | ＜0.9A |
| USB output | 5VDC/Max.1A | |||
| RS485 com. port | 5VDC/200mA | |||
| Mechanical parameters | ||||
| Mechanical parameters | M6 | |||
| Dimension (Length x Width x Height) | 371×231.5×123mm | |||
| Mounting dimension | 345×145mm | |||
| Mounting Holes | Φ6mm | |||
| Net Weight | 5.8kg | 5.8kg | 5kg | 5kg |
Conditions to start the cooling fan:
①Heat sink temperature is higher than 45℃ or The internal inverter temperature is higher than 45℃ or ###span class="magic-39"
>span class="magic-40"###IP1500-11-Plus(T) ；IP1500-12-Plus(T) ；IP1500-21-Plus(T) ；
IP1500-22-Plus(T) ；IP1500-41-Plus(T) ；IP1500-42-Plus(T)
②Heat sink temperature is higher than 45℃ or The internal inverter temperature is higher than 45℃ or The output power is higher than 50% of the rated power
IP1000-11-Plus(T/N) ；IP1000-12-Plus(A/E/C/T) ；IP1000-21-Plus(T/N) ；IP1000-22-Plus(A/E/C/T) ；
IP2000-11-Plus(T) ；IP2000-12-Plus(T) ；IP2000-21-Plus(T) ；IP2000-22-Plus(T) ；IP2000-41-Plus(T) ；
IP2000-42-Plus(T) ；IP3000-11-Plus(T) ；IP3000-12-Plus(T) ；IP3000-21-Plus(T) ；IP3000-22-Plus(T) ；
IP3000-41-Plus(T) ；IP3000-42-Plus(T) ；IP4000-41-Plus(T) ；IP4000-42-Plus(T) ；IP5000-42-Plus(T)
Conditions to stop the cooling fan:①Heat sink temperature is lower than 40℃
and ###span class="magic-9"
>span class="magic-10"###and The output power is lower than 300W
IP1000-11-Plus(T/N)；IP1000-11-Plus(T/N)10 ；IP1000-12-Plus(A/E/C/T) ；
IP1000-21-Plus(T/N) ；IP1000-22-Plus(A/E/C/T)
②Heat sink temperature is lower than 40℃ and The internal inverter temperature is lower than 40℃ and The output power is lower than 500W
IP1500-11-Plus(T) ；IP1500-12-Plus(T) ；IP1500-21-Plus(T) ；
IP1500-22-Plus(T) ；IP1500-41-Plus(T)；IP1500-42-Plus(T)
③Heat sink temperature is lower than 40℃ and The internal inverter temperature is lower than 40℃ and The output power is lower than 40% of the rated power
IP2000-11-Plus(T) ；IP2000-12-Plus(T) ；IP2000-21-Plus(T) ；IP2000-22-Plus(T) ；IP2000-41-Plus(T)；
IP2000-42-Plus(T) ；IP3000-11-Plus(T) ；IP3000-12-Plus(T) ；IP3000-21-Plus(T) ；IP3000-22-Plus(T)；
IP3000-41-Plus(T) ；IP3000-42-Plus(T)；IP4000-41-Plus(T) ；IP4000-42-Plus(T) ；IP5000-42-Plus(T)；
- Comment
- Administrator reply
- Hello, our service will contact u soon.
- Comment
Our company makes delivery all over the world
We only offer quality goods with higher cost performance
You have 30 days to test your purchase
© 2017 - 2023 PowMr. All Rights Reserved.
