PowMr Remote Meter for K100 PRO

Write a review
Ask a question
K100 PRO-Meter
In stock

Minimum quantity for "PowMr Remote Meter for K100 PRO" is 1.

Why PowMr?
  • — 24 months warranty
  • — Fast Delivery
  • — Free Shipping 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 

PowMr UK warehouse,AUS warehouse,USA warehouse,GER warehouse and China warehouse

BrandPowMr WarehouseGER Warehouse, USA Warehouse
PowMr 100A MPPT Solar Charge Controller + Remote M
Total list price$236.98
Price for all$231.98

PowMr Auto 12/24VDC 100A MPPT Solar Charge Controller Remote Meter LCD Display With 0 Layer Pricnciple Operating Model


MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%.


  • Brand: PowMr
  • Product Model: K100 PRO-Meter
  • Romote Meter LCD Display
  • All the Various Real-time data show on one display ,Convenient user to check( 0 Layer Pricnciple Operating Model )
  • Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
  • High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
  • Ultra-fast tracking speed and guaranteed tracking efficiency.
  • 12/24VDC automatically identifying system voltage.
  • LCD panel display design, dynamically displaying tool‟s operating data and working condition.
  • Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
  • Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries.
  • Battery temperature compensation function.
  • Multiple load work modes
  • Application Scenario: Household system, monitoring system, base station, street lighting system, small power stations, etc.
  • This solar charge controller with three time function.

A: time (night working) B: period (pause) C: time slot (dawn working)

Installation Instructions

Installing wires, first loosen the screw counter clockwise

  • Prepare complete installation tools, materials and cable. Please matching suitable cable.
  • ensure that the current density <4A/mm2 This will help reduce the line pressure drop. Check the installation site meets the relevant safety requirements, avoid damp, dusty, flammable, explosive and corrosive gases
  • Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing. In order to ensure a good controller cooling conditions, the controller on the bottom of each reserved 10cm space
  • As shown on the right wiring sequence: load, battery, solar. Battery plate is connected to the controller to be taken to ensure that the load, battery. The polarity of the solar cell panel and controller.
  • Warning: to prevent accidents (high pressure or high temperature), non professionals can not engage in loading and unloading operations.
  • Be very careful when installing the batteries, especially flooded lead-acid battery. Please wear eye protection, and have fresh water available to wash and clean any contact with battery acid.
  • Keep the battery away from any metal objects, which may cause short circuit of the battery.
  • The controller requires at least 150mm to 300mm of clearance above and below for proper air flow, ventilation heat dissipation fan is highly recommended if mounted in a sealed enclosure.

Content Included

  • 1X MPPT Romove LCD Display
  • 1XCable(2meter)
  • 1X English User Manual
Maximum power current
Load output power
Installation Lin(mm2)
Installation Line(AWG)
Peak power of solar cell panel(Max Wp)
Battery capacity configuration
Original Value
Battery float voltage
13.8V(12V system) / 27.6V(24V system)
Battery (under voltage) protection
10.6V(12V system) / 21.2V(24V system)
Battery (under voltage) recovery voltage
12.6V(12V system) / 25.2V(24V system)
System load loss: ≤13mA
Loop Buck: ≤100mV
Operating Temperature:-10℃~60℃
Storage Temperature: -30℃~70℃
Humidity requirements:≤90%, No condensation
Temperature compensation: -4mV/Cell/℃
Maximum open circuit voltage of the solar panel
18V-48V(12V system)/36V-96V
(24V system)
Solar panels maximum open circuit voltage (V)

User Manual (K100-PRO-manual.pdf, 431 Kb) [Download]

Brand information
Brand :
Other Information
  • GER Warehouse
  • USA Warehouse
Find similar

No reviews found


You May Also Like
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We only offer quality goods with higher cost performance

Returns within 30 days

You have 30 days to test your purchase