PowMr 24V DC Output 220V AC 3000Watt Solar Inverter Charger POW-3KM-24

Single-phase 220v Solar Inverter---Back-up power for your off-grid system!

The 220V solar inverter is a new all-in-one hybrid 40A mppt charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output.

Features:

1. 220V Pure sine wave inverter
2. Compatible to mains voltage or generator power
3. Auto restart while AC is recovering
4. Smart battery charger design for optimized battery performance
5. Cold start function
6. For 24V Lead-acid battery
7. The comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
8. Protection:

• Overload/ Over temperature/ short circuit protection

Built-in 40A MPPT CONTROLLER 3KVA/3KW Inverter Mode Specifications

• Rated Output Power 3KVA/3KW
• Peak Efficiency 93>#/span###
• Output Voltage Waveform Pure Sine Wave
• Output Voltage Regulation 230Vac±5>#/span###
• Output Frequency 50Hz
• Surge Capacity 2* rated power for 5 seconds
• Overload Protection 5s@≥150% load; 10s@105%~150% load
• Nominal DC Input Voltage 24Vdc
• Cold Start Voltage 23.0Vdc

3KW 40A MPPT Controller Inverter General Specifications

• Operating Temperature Range -10°C to 50°C Storage temperature -15°C~ 60°C
• Humidity 5% to 95% Relative Humidity (Non-condensing)
• Dimension (D*W*H), mm 100 x 285 x 334 Net Weight, kg 8.2
• Recommended battery cable size: 1 x 2AWG Cable (mm2) 35 Torque value（max） 2 Nm
• PV Connection
• When selecting proper PV modules, please be sure to consider the below parameters:
• 1. Open circuit Voltage (Voc) of PV modules not exceed the max. PV array open-circuit voltage of the inverter.
• 2. Open circuit Voltage (Voc) of PV modules should be higher than min. battery voltage.
• Max. PV Array Open Circuit Voltage 102Vdc PV Array MPPT Voltage Range 30~80Vdc

24V Inverter Charge Mode Specifications

• Utility Charging Mode
• INVERTER MODEL 3KVA Charging Algorithm 3-Step AC Charging Current (Max) 25Amp (@VI/P=230Vac)
• Bulk Charging Voltage: Flooded Battery 29.2 AGM / Gel Battery 28.2
• Floating Charging Voltage 27Vdc
• MPPT Solar Charging Mode
• Charging Current 40Amp PV Array MPPT Voltage Range Max 30~80Vdc
• PV Array Open Circuit Voltage Max 102Vdc
• Charging Current(AC charger plus solar charger) 60Amp

Package:

• 3000W Solar Inverter x 1
• Communication cable x 1
• Software CD x 1
• DC Fuse x 1
• Ring terminal x 1
• Strain relief plate x 2
• Screws x 4

220V Single Phase 3000W Solar Inverter

Output source priority:(To configure load power source priority)

Solar first(PV Priority):

• Solar energy provides power to the loads as first priority than battery energy then Utility.

Utility first:

• The utility will provide power to the loads as first priority. Solar and battery energy will provide power to the loads only when utility power is not available.

SBU priority:

• Solar energy provides power to the loads as first priority.

• If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time. then Utility

Connection

220V Solar Inverter warm tips:

• Please strictly follow the installation procedure when you want to disconnect AC or DC terminals

• Be very cautious when working with metal tools on or around batteries.

Notice: The correct configuration of the battery capacity of the system is determined according to the specific use requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult us.