Powmr 10KW Inverter 15KW Solar Hybrid PV Inverter Parrallel 6 Units With 3 Phase

Powmr 10KW Inverter 15KW Solar Hybrid PV Inverter Parallel 6 Units With 10kw inverter 3 phase

Overviews

This hybrid PV inverter can provide power to connected loads by utilizing PV power, utility power, and battery power. The hybrid PV inverter is a hybrid inverter that combines solar system, AC utility, and battery power source to supply continuous power. It is suitable for remote areas where the cost of utility is too high or emergency usage when utility is not stable.

Feature

• Brand: Powmr
• Product Model: POW-10KW-15KW-3-PHASE
• Pure sine wave output
• Self-consumption and Feed-in to the grid.
• Programmable supply priority for PV, Battery or Grid
• User-adjustable battery charging current suits different types of batteries
• Programmable multiple operation modes: Grid-tie,off-grid, and grid-tie with backup
• Built-in timer for various modes of on/off operation
• Multiple communication for USB, RS-232, Modbus, and SNMP
• Monitoring software for real-time status display and control
• Parallel operation up to 6 units.

Product Instruction:

Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), batteries, and the utility. When the MPP input voltage of PV modules is within an acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge the battery. This inverter is only compatible with PV module types of single-crystalline and polycrystalline. Do not connect any PV array types other than these two types of PV modules to the inverter. Do not connect the positive or negative terminal of the solar panel to the ground. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter

Note: By following the EEG standard, every inverter sold to the German area is not allowed to charge the battery from Utility. The relevant function is automatically disabled by the software.

Product Overview

1. LCD display panel
2. Operation buttons
3. AC Grid connectors
4. AC output connectors (Load connection)
5. PV connectors
6. DC Switch
7. Battery thermal sensor
8. EPO
9. Current sharing port
10. Relay control port
11. Dry contact
12. USB communication port
13. RS-232 communication port
14. Parallel communication port
15. Intelligent slot
16. Battery connectors
17. Connector for surge protective device (Reserve)

Inverters Configuration

Two inverters in parallel:

Three inverters in parallel:

Four inverters in parallel:

Five inverters in parallel:

Six inverters in parallel: