EPever 30A MPPT Solar Charge Controller 12volt Solar Battery Charger 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN

Write a review
Ask a question
Tracer3210AN
$10699
In stock
+

Minimum quantity for "EPever 30A MPPT Solar Charge Controller 12volt Solar Battery Charger 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN" is 1.

Why PowMr?
  • — Fast Delivery
  • — Free Shipping 
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
Wholesale

PowMr UK warehouse,AUS warehouse,USA warehouse,GER warehouse and China warehouse

BrandEPever Lithium Battery Activation Active Lithium Batteries Battery Voltage12V, 24V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries, User Mode Charging Current30 Amps Ground TypeNetagive Ground Solar Panel Max Input Power500W-1000W Solar Panel Max Input Voltage100V WarehouseAUS Warehouse, GER Warehouse, USA Warehouse

EPever 30A MPPT Solar Charge Controller 12V 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN


Epever Mppt Solar Charge controller Features:

* User programmable for battery types, load control, etc.

* Multiple load control modes: manual control, light ON/OFF, light On+Timer, and test mode.

* LCD display design, dynamically displaying tool's operating data and working condition.

* 3-Stage charge with PWM Solar Charge Controller output

* Battery temperature compensation function.

* Real-time energy statistics function.

* Common positive grounding design

* RS485 port with industrial standard MODBUS open architecture

* Fully available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting. 

* Support software upgrade.

* Warranty: lifelong warranty



Epever Mppt Solar Charge controllerElectronic protections:

• PV reverse polarity protection

• PV short circuit protection

• PV over current alarm protection

• Battery overcharge protection

• Battery over-discharge protection

• Battery reverse polarity protection

• Load short circuit protection

• Load overload protection

• Overheating protection


Package includes:


Datasheet--- (EPever_Tracer-AN_10-40A__Datasheet.pdf, 283 Kb) [Download]

User Manual--- (EPever_Tracer-AN_10-40A__User_Manual.pdf, 1,901 Kb) [Download]

Certificate--- (EPever_Tracer-AN_10-40A__ROHS_Certificate.pdf, 742 Kb) [Download]

Certificate--- (EPever_Tracer-AN_10-40A__CE_Certificate.pdf, 44 Kb) [Download]

Brand information
Brand :
EPever
Battery Information for inverters and controllers
Lithium Battery Activation :
  • Active Lithium Batteries
Battery Voltage :
  • 12V
  • 24V
Battery Type :
  • Lifepo4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • Gel Batteries
  • Lead-acid Batteries
  • AGM Batteries
  • User Mode
Solar Charge Controllers Features
Charging Current:
  • 30 Amps
Ground Type:
  • Netagive Ground
Solar Panel Max Input Power:
  • 500W-1000W
Solar Panel Max Input Voltage:
  • 100V
Waterproof:
No
Other Information
Warehouse:
  • AUS Warehouse
  • GER Warehouse
  • USA Warehouse
Find similar
Question: Is this a true mppt charge controller with a transformer in it?
Answer: yes it is true mppt with large transformer coil inside.2years warranty .5-8years lifetime.
Question: This wiil work with richsolar panel
Answer: yes
Question: If I am just using lights can I hook up ac lights to the load terminal?
Answer: sorry it can not.the outout from load terminal is dc.you need inverter to connect ac lights.(suggest connect inverter to the battery directly.not connect to load terminals)
Question: I want to run 2-3 light off of solar power can I use the output terminal for this or would I need an inverter?
Answer: yes you need an inverter
Question: Can this be installed vertically? And if so what clearance do I need in inches to supply enough airflow for cooling?
Answer: YES. Up, down, left and right recommended at least 5.90 inches.
Question: Regarding the load over discharge disconnect, is there a time delay before disconnect? ie, to wait out a quick temporary sag in voltage?
Answer: Dear customer, sorry, this controller doesn't have time delay function.
Question: What is the max wire guage that will fit in the terminals for the battery and inverter connections?
Answer: 6awg
Question: do have you to configure this for 12v or 24v or will it know that I'm 12v? does it have a default?
Answer: It will read your battery auto and use 12V or 24V default parameter charge your battery.
Question: Do you power the mppt PV or battery first?
Answer: Wire battery first, after controller LCD display power on, turn on your solar panel.
Question: where can we get software for PC programing?
Answer: you can download the software on epever official website or we can send you via mail.
Question: Can I connect in serie 3 panels of 300 watt and Vmp: 33V?
Answer: For 3210AN controller, Please note the below info: If your battery is 24V Solar panel: Max power DO Not exceed 1100W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . If your battery is 12V Solar panel: Max power DO Not exceed 580W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . 3 panels of 300 watt and Vmp 33V in serie,then your panel max power is 900W, Voltage is 99. In 24V battery, it is ok. But Voltage is too close the voltage threshold, not recommend. Suggest you parallel 
Question: What's the Maximum 24v current at the load Terminal?
Answer: load Terminal share the same voltage with battery's voltage.


4.9 out of 5
Reviews: 60
5 stars
85%
4 stars
15%
3 stars
0%
2 stars
0%
1 star
0%
Peter
Verified purchase
United Kingdom (Great Britain)
Advantages
Epever MPPT charge controller
Comment
This seems a well made piece of kit, very easy to install and set up. It as been working on my narrow boat for a couple of months now and all seems well.
Shannon
Verified purchase
United States
Advantages
Amazing how many amps you get versus an old pwm charger.
Comment
Wow this unit is awsome! Was only getting about 4 to 5 amps out of my old pwm charger with two 100 watt windy nation panels. Not quite enough to keep you going dry camping unless you were in full sun all the time. I ordered this unit and wow! 10 to 11 amps in cool sunlight. It also regulates amazingly well. The minute you get a load it kicks up to fill amperage, the minute the batteries are up to around 13.5 volts it starts to scale back to around 1.5 to 1 amp. Also the remote meter is awsome! No more going outside to check what's going on, this unit gives you all the readings and you can also control the unit from the remote. I would have given it a full five stars but the remote cable is way too short. Just buy a normal Ethernet cable and it will work. All in all I highly recommend this unit!
cactusbum
Verified purchase
United States
Advantages
Works well
Comment
This does what it should. Runs my three 100 watt panels on my MH. Batteries are always charged max when solar gain is there. That's about it.
Seymour M. Pelton
Verified purchase
United States
Advantages
Going from pwm to mppt is well worth the money.
Comment
After my second hurricane I decided to put together a small emergency solar system. I put 4-100 watt solar panels in series parallel wired for 24 volts to lower wire loss and my batteries in parallel at 12 volts. The controller I used was an Epever vs3024 pwm that did the job of keeping my batteries charged. The maximum current with the Sun overhead on a clear day was right at 11 amps which was all that I could expect from my series parallel solar panels. I won't tell you my age but I've been retired over 20 years and this is all new technology for me, anyway I learned more about the mppt type of controller and decided to try one. I purchased the Epever 3210 and what a difference it made. The amount of charging current now going to my batteries under the same conditions as before has over doubled, I am seeing charging currents of as high as 23, and 24 amperes, and under cloudy conditions it still wrings the most current out of the solar power. It was definitely well worth the money for me.
M. McGuire
Verified purchase
United States
Advantages
Works OK
Comment
This is an OK unit. It is however an example of a product designed by people who do not use it. The most important question in the mind of an offgrid user is "Did my batteries get charged today?" This would be very easy to display. Also the Bulk, Absorb and Float stages need to be indicated on the display. This unit did none of these. However as an MPPT controller it works fine.
Jon A
Verified purchase
United States
Advantages
Hook up panels, hook up battery, all done.
Comment
Very easy to install. Very informative display. I changed the panels from series to parallel which changed the voltage and I didn’t have to adjust any settings.
Customer
Verified purchase
United States
Comment
Delivered as advertised at a reasonable price relatively quickly
John R. Stoffel
Verified purchase
United States
Advantages
Five Stars
Comment
Flawless operation
USAMadeONLY
Verified purchase
United States
Advantages
Love to replace my starter stuff with quality!
Comment
I like the accuracy, size, quality, functionality and looks. Seems very well made and reliable. I also like it with the Bluetooth adapter to assist with functions. Good value!
E.C.F.
Verified purchase
United States
Advantages
Five Stars
Comment
Work very well.
David G. Wilson
Verified purchase
United States
Advantages
Big unit with lots of features
Comment
I ordered this after frying out 2 cheap charge controllers. I'm running 3x100w panels and a couple 12 volt batteries that I thought I killed. This thing got them charged back up again and with my low usage, I should get another 5 years out of my heavy beast batteries. Lots of features to set up in the software, but I just left everything in the default mode. Having the separate monitor is cool and allows me to brag at how much energy I'm absorbing from the sun and how little I'm actually using in my campervan.
Annegret Bredow
Verified purchase
Germany
Advantages
Lohnt sich
Comment
Statt billgig habe ich mich für den EPEVER entschieden. In der Frontscheibe ein 100W Element soll während des Stehens meines Kleintransporters die Batterie geladen werden. Die Ausbeute mit 0,4 bis 0,9 A ist nicht gerade der Brüller, reicht aber, um die Batterie zu beschäftigen. Gemessen an einer an sich ungünstigen Stelle. Immerhin bietet mir das Gerät an, ein zweites Element anzuklemmen. Bei einem billgen Gerät ist dies nicht möglich. Einstellungen habe ich wenig vornehmen müssen. Erst die Batterie anklemmen, warten und dann die Solarpaneele. Fertig. Würde ich wieder kaufen.
jffsbr
Verified purchase
United States
Advantages
best one in the market recommend it.
Comment
easy to install issues for more then a year
Carlton bradley sawyer
Verified purchase
United States
Advantages
Wont connect to software?
Comment
Tried and tried to figure out why I couldn't get this solar charge controller to connect to the solar station monitor to adjust the parameters of timing controls and low voltage shut off on my batteries. While in the solar station program click on port configure and click on add and then click update! Super happy with this charge controller, been using it for over a month now with no issues!
Micha
Verified purchase
Germany
Advantages
Super Gerät
Comment
Kann ich nur Empfehlen. Angeschlossen und sofort wurden entsprechende Daten angezeigt. Sollte mann Daten am PC einsehen wollen, sollte gleich das entsprechnede Kabel mit bestellt werden. Die Software dafür befindet sich im Netz.
jason
Verified purchase
United States
Advantages
Does everything its advertised to do
Comment
This it the third one that I have purchased. Very nice products does everything thinking it is advertised to do. Will purchase again.
denny dixon
Verified purchase
United States
Advantages
Set it forget it!
Comment
Its awsome go buy it now!!!!! With the add on remote it works perfect!!!!
Customer
Verified purchase
United States
Advantages
Nice Controller
Comment
Been running for about a month. Works as advertised. Wired panels for 24v with 12v batteries. Charges much better than my old PWM unit. The remote cable is too short. I just replaced with a 25' CAT5 and works great. Only complaint is it is difficult to see the display on the main unit at any sort of an angle (not a big deal). MPPT gives much more flexibility than PWM. Just buy it, for the price you can't do much better.
Wilbur
Verified purchase
United States
Advantages
MPPT is the way to go
Comment
Works well but I am still learning the correct operation
Michael
Verified purchase
United States
Advantages
Happy in Pennsylvania
Comment
Review of solar system just installed.Components purchased from Amazon:HQST 150W 12V Poly Solar Panel 150 Watt Off Grid PV, Epever Tracer 3210AN Solar Charge Controller MPPT 30A with MT50 remote meter, 8 AWG Solar Panel Extension Cable Wire MC4 Connector 40 feet from panel to controller. Connected to two 105 Ahr flooded deep cycle batteries in parallel.Conditions: date October 17, 2019, central Pennsylvania, bright sun panel tilt 50 degrees.Results: Best voltage and amps recorded 137 watts, at 15.7 volts 8.8 amps. Normally I see around a 113 watts with a 440 watt load on the batteries with good sun.I'm very happy with this equipment.
You May Also Like
  • Cyber Week Deals
  • Bestsellers
  • Most Popular
Cyber Week Deals
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We only offer quality goods with higher cost performance

Returns within 30 days

You have 30 days to test your purchase