2000W Wind Turbine Grid Tie Inverter For Input 45-90V to output 230V AC Wind System Pure Sine Wave✔3 Phase✔

Write a review
Ask a question
SUN-2000G-W-A-45-90V
$33899
In stock
Shipping Item(s) From China Warehouse If Outstock In Location Warehouse
+

Minimum quantity for "2000W Wind Turbine Grid Tie Inverter For Input 45-90V to output 230V AC Wind System Pure Sine Wave✔3 Phase✔" is 1.

Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
    Wholesale

    PowMr UK warehouse,AUS warehouse,USA warehouse,GER warehouse and China warehouse

    NEW 2000W Wind Power Grid Tie Inverter- for 3 Phase Wind Turbines

    --Max Efficiency:>92% MPPT Efficiency:99%

    --DC/AC 45V-90V

    --AC 220V 230V 240V 50hz/60hz

    Features :

    1. Low cost and easy installation

    2. Directly connect to three phase wind turbine

    3. Much better output waveform compare with similiar GTI

    4. Improving the efficiency of the entire solar power system

    Overload protection ,Anti-island protection

    Short-circuit protection/Reverse polarity protection

    5. AC output voltage and current THD<5%,PF>99%

    6. Build in dump load function

    Introduction of Sunshine Grid Tie Inverter for Wind Turbine

    The small wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable.

    The inverter can be connected to any outlets of utility grid at house. It monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid's, and the volume is a bit higher than the grid's, then according to the current controlled PWM, to control the output power to the grid.

    The grid tie inverter only outputs power when the home grid is on.

    When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverter will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid.


    1

    fengefengefenge

    Technical Data

    Model

    SUN-2000G-W-A-45-90V

    Max. Power Output

    2000W

    Input AC/DC Voltage Range

    45V ~ 90V

    AC Output Voltage Range

    185-265VAC

    Output Frequency

    46Hz~65Hz

    Standby Power Consumption

    <0.5W

    Total Harmonic Distortion

    <5%

    Peak Inverter Efficiency

    92%

    Power Factor

    0.99

    Output Wave Form

    Pure Sine Wave

    MPPT Efficiency

    99%

    Over Current Protection

    Yes

    Over Temperature Protection

    Yes

    Reverse Polarity Protection

    Yes

    Anti-Island Protection

    Yes

    Stackable

    Yes

    Weight ( Kg)

    6.5kg

    Dimensions (W x H x D)

    434x196x88mmm

    7

    (1) (2) Dump load resistor connection Terminal. These terminals will connect to the dump load resistor.

    (3) AC socket, This socket will connect the inverter to the public grid via the AC cable.

    (4) Cooling fans.

    (5) Input Terminals. These terminals will connect to the wind turbine.


    How to select a wind grid tie inverter ?

    1. Max output power of the wind turbine:

    500w-1000w wind turbines , suggest 1000w inverter .

    1000w-2000w wind turbines , suggest 2000w turbine .

    2. Voltage range :

    24v 36v 48v wind turbines , suggest 22-65v inverter.

    48v 60v 72v 90V wind turbines ,suggest 45-90v inverter .

    Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter .

    How to use a grid tie inverter with battery and wind turbine ?

    If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI ,battery function ) . the wind inverter can not work with battery well .

    What is the dump load controller/resistor ?

    The dump load controller/resistor is used to protect the wind turbine and inverter .if the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage .


    4

    WAL model of grid tie invereter connected with AC output type of wind turbine.

    5

    Connecting two 1000G2-WAL with a max. power is the 2KW wind turbine

    fengefengefenge

    User manual of the wind power inverter

    please contact us to down load .

    液晶显示3_Fotor22_Fotor800

    wind LCD 4in1_Fotor液晶显示5_Fotor_Fotor800

    1011


    Optional part :


    Wifi Port for MPPT 1000W/2000W NEW SUN Solar Grid Tie Inverter

    RS485 connected

    Web / Mobile Phone App on Line Monitoring

    NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together .

    NOTE : It will be built-in side the inverter .

    Product description :


    wifi plug2 800

    NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together .

    NOTE : It will be built-in side the inverter .


    Web Model:

    534


    APP Model:

    12


    type  POW-30AH-12.8V POW-50AH-12.8V POW-100AH-12.8V
    Nominal voltage 12.8V 12.8V 12.8v
    Rated capacity 30Ah(0.2C/25)℃(Min:29Ah) 50Ah(0.2C/25)℃(Min:49Ah) 100Ah (0.2C/25°C) (Min:96Ah)
    Operating voltage range 10V-14.6V(Typical:12.8V) 10V-14.6V(Typical:12.8V) 10V~14.6V (Typical:12.8V)
    Charging voltage 14.6V 14.6V 14.6v
    Dischange cut -off voltage  10V 10V 10v
    Charging current(Max) 15A  25A  50A
    Dischange current (Max) 30A 50A 100A
    Length 195mm 228mm 325mm
    Width 133mm 138mm 170mm
    Height 171mm 210mm 215mm
    Weight about 4.5kg about 6.2kg About 11.5kg
    Shell Plastics/Black Plastics/Black Plastics/Black
    Series Maximum support for 4 sets in series Maximum support for 4 sets in series Maximum support for 4 sets in series
    Parallel support support Support
    Alarm&potection Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc Over Voltage, Under Voltage, Over Current, Short Circuit etc.
    Cooling mode  Automatic cold and hot  Automatic cold and hot  Automatic cold and hot
    Terminal stud M6 M8 M8
    Altitude ≤4000m ≤4000m <4000m
    Recommended operating charge temperature  15℃-40℃ 15℃-40℃ 15%~85%
    Recommended operating dischage temperature 15℃-40℃ 15℃-40℃ 0°C~50°C
    Recommended operating storagetemperature -20℃-45℃ -20℃-45℃ -10°C~60°C
    Humidity 15%-85% 15%-85% 15°C~40°C
    Operating Charge temperature 0℃-50℃ 0℃-50℃ 15°C~40°C
    -10Operating Dischage temperature -10℃-60℃ -10℃-60℃  -20°C~45°C

    User Manual (Temank-Power-Inverter-JYP-1000W-12-11-manual.pdf, 18,553 Kb) [Download]


    No reviews found

    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase