- Administrator reply
- Our service will reply to you soon
10KW 48Vdc 220Vac All In One Inverter/Charger And MPPT Solar Charger Pure Sine Wave Hybrid Inverter Charger with Parrallel funciton POW-MKS III-5K-48V-P*2
PowMr Hybrid Inverter Charger, POW-MKS III-5K-48V-P with inverter/charger with MPPT solar charger
2PCS POW-MKS III-5K-48V-P for 220Vac
10kw inverter Product Description:
The device has an integrated MPPT solar charge controller of one to two weights. It can accept the possible photovoltaic voltage, allows various photovoltaic modules to be connected, avoids the use of combiner boxes, and reduces installation costs.
Product Features:
• Compatible with Lithium batteries
• Integrated high-voltage MPPT charge controller(s).
• Integrated AC battery charger
• Up to 9 48V inverters can be connected in parallel, 3-phase, or split-phase for up to 58.5 kW of synchronized AC power
• Galvanic isolation of battery allows positive or negative grounding of the same
• Datalogger with up to 60 days of data storage
• Charge controller(s) function(s) even if the inverter is turned off to keep batteries fully charged
• Functions even without an expensive battery to reduce energy consumption from the grid with minimal investment
• Detachable display/communication unit with 6 LEDs and an intuitive LCD screen
• High level of connectivity: BLE, USB-OTG (on-the-go), CAN Bus, RS-485, RS-232, relay for generator start
• Integrated buzzer for error indications
• Washable filter reduces dust buildup in the all in one inverter
• Grid feed-in option is code-protected to avoid accidental feed-in
Introduction:
This 10kw inverter can be used in parallel with two different operation modes.
1. Parallel operation in a single phase with up to 9 units. The supported maximum output power is 45KW/45KVA.
2. Maximum nine units work together to support three-phase equipment. Seven units support one phase maximum. The supported maximum output power is 45KW/45KVA and one phase can be up to 35KW/35KVA.
10kw inverter Package Listing:
- Inverter---2pcs;
- Clamp Sensor---2pcs;
- Power Cable---2pcs
- English Manual--2pcs;
- Wifi(Optional)
Parallel Operation in Single phase








Please read the specification carefully before install
Table 2 Inverter Mode Specifications
INVERTER MODEL |
5KW |
Rated Output Power |
5KVA/5KW |
Output Voltage Waveform |
Pure Sine Wave |
Output Voltage Regulation |
230Vac±5% |
Output Frequency |
60Hz or 50Hz |
Peak Efficiency |
90% |
Overload Protection |
5s@≥150% load; 10s@110%~150% load |
Surge Capacity |
2* rated power for 5 seconds |
Nominal DC Input Voltage |
48Vdc |
Cold Start Voltage |
46.0Vdc |
Low DC Warning Voltage |
|
@ load < 20% |
44.0Vdc |
Low DC Warning Return Voltage |
|
@ load < 20% |
46.0Vdc |
Low DC Cut-off Voltage |
|
@ load < 20% |
42.0Vdc |
High DC Recovery Voltage |
64Vdc |
High DC Cut-off Voltage |
66Vdc |
- No Lithium Batteries Activation
- 48V
- Lithium Batteries
- Flooded Batteries
- AGM Batteries
- User Mode
- High frequency Inverters
- Single Phase
- Parallel Single for Three Phase
- 230Vac±5%
- 5000W
- 450V-500V
- build-in MPPT Solar Charge Controller
- 5000W
- 100 Amps
- 100amps
- 100Amps
- Wifi Module(Optional)
- Administrator reply
- Yes, sure