EPEVER Remote Meter MT50 for Tracer MPPT
PowMr EPEVER Remote Meter LCD Display for Tracer AN BN series MPPT Charge Controller MT50
Functions like the real-time monitoring of the operational data and working status of a controller, the browse and modification of charge/discharge control parameters, the setting of device parameters and load control parameters, and the restoration of factory defaults, based on the LCD display and functional key operation.
- Brand: PowMr
- Factory: EPever
- Product Model: MT50
- Automatically identify and display the type, model, and relevant parameter data of controllers
- Real-time display the operational data and working status of the connected devices in digital, graphic, and textual forms by a large-screen multifunction LCD
- Direct, convenient, and rapid operation of six navigation function keys
- Both data and power flow on the same lead, no need for external power
- Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters, and load control parameters
- Real-time display and acoustic alarm of failure information of the connection devices
- Longer communication distance based on RS485
Wall installation steps:
Step1: Locate and drill screw holes based on the Frame Mounting dimension of the base, and erect the plastic expansion bolts
Step 2: Use four ST4.2×32 self-tapping screws to fix the Frame
Step 3: Use four M4×8 pan head screws to mount MT50 Surface on the Frame
Step 4: Mount the four associated screw plugs into the screw holes
Steps of surface mounting
Step 1: Locate and drill screw holes based on the installation size of the Surface
Step 2: Use four M4×8 cross recessed pan head screws with M4 nuts to mount MT50 Surface onto the panel
Step 3: Mount the four associated white screw plugs into the screw holes
Take full consideration of the plugging/unplugging space of the communication cable and the length of the cable during installation to see if they are appropriate
Please get more information from the product manual
Backlight and acoustic alarm ON<65mA
98×98 mm / 3.86×3.86 inches
114×114 mm / 4.49×4.49 inches
Standard 2m,Max 50 m
Simple package: 0.23 Kg
Standard package:0.32 Kg
MT50 REMOTE METER
1.Energy statistics display function.
2.Longer communication distance based on RS485.
3.Load modes:manual control, light on/off, light on/timer, timer.
4.Real-time alarm of failure information of the connection devices
5.Easy and convenient to operate with 6 buttons, and programmable parameters.
6.A large LCD screen can dynamically display the tool's operating data and working conditions.
7.It can automatically identify & display the type, model, and relevant parameter of the controller.
8.Battery type selection: Gel, sealed, flooded and User(programmable) .
- 1x MT50 Remote Meter
- 1x Cable
- 4x Mounting Screws
Face plate dimension:3.86×3.86 inch
Frame dimension: 4.49×4.49 inch
Connector type: RJ45
Meter cable:Standard 2m.
Ambient Temperature: -4°F -- 158°F
- AUS Warehouse
- GER Warehouse
- USA Warehouse
|Question:||If you're using more than one charge controller do you need an mt54 each one|
|Answer:||Hi dear customer,If you use multiple controllers, you only need one MT50 to set the parameters|
|Question:||Does it have a memory chip to store accumulated data?|
|Answer:||Hi dear customer, when the mt50 connected with controller, the data will be accumulated in the controller the mt50 connected with, you can check the data by mt50,but when the controller is powered off, the information will be gone.|
|Question:||Can the mt-50 be used with lithium iron phosphate batteries|
|Answer:||Hi dear customer,Is allowed,But to set more lithium battery parameters, it is recommended that you buy a Bluetooth or wifi module|