PowMr 10A IP65 Waterproof Solar Charge Controller
Overview
1. INPUT VOLTAGE BETWEEN 15V AND 41V - The 10A solar controller waterproof(IP68) is suitable for Outdoor Use. Intelligent 4-stage PWM charging. The PV can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
2. Maximum power of PV is 120W for the 12Vdc system and 240W for the 24Vdc system, and the maximum current is 10A. It is suitable for 12Vdc/24Vdc rechargeable batteries. In order to lengthen its service life, please do not overload.
3. EASY TO MONITOR THE LED INDICATOR LIGHTS - The solar controller integrates Three LED indicator lights: green (Charge indicator), White (BAT power indicator), and Red (Output indicator). The product also provides short-circuit, open-circuit, overload protection, as well as Dual MOSFET Reverse current and low heat protection
4. PWM CHARGE CONTROLLER - Working mode is 24 hours. Easy to mount directly to the frame of PV, the almost fuselage are surrounded by aluminum with a heat sink to dissipate heat.
POW-10A-12V
Safety Instructions:
A) Make sure your BAT has enough voltage for the waterproof solar charge controller to recognize the batteries type before the first installation and only sufficient voltage can charge or activate the controller. That means it won't charge or activate when hooked to a dead or low-voltage BAT or connecting only with PV but without BAT
B) The connection cable should be as short as possible to minimize loss.
C) The solar regulator is suitable for lead-acid batteries: OPEN, AGM, GEL It is not suited for nickel-metal hydride, lithium ions
D) The charge regulator is only suitable for regulating PV. Never connect another charging source to the charge regulator.
How to connect the solar system with the controller:
Step 1: Connect the BAT to the solar charge controller firstly- plus and minus. (it will auto adapts to the BAT voltage)
Step 2: Connect the load to the controller secondly.
Step 3: Connect the PV to the controller finally - plus and minus.
Note: The reverse order applies when de-installing.
Key Features:
4-stage PWM Charging
| Protect SystemElectronic protection: short-circuit, open-circuit, overload protection, as well as Dual MOSFET Reverse current and low heat protection Reverse protection: Any combination of solar module and battery, without causing damage to any component | IP68 WaterproofWaterproof charge controller more suit for Outdoor Use. Such as light etc. | LED Indicator LightsThree LED indicator lights:
It's helpful for finding out which part is wrong quickly. |
Specification:
◆ Color: Black
◆ Rated Charging Current:10A
◆ Rated Discharging Current:10A
◆ Max Solar Input Voltage: <41V
◆ System Voltage:12V/24V Auto Adapt
◆ Self consume: <10mA
◆ Operating Temperature: -20 ~ +60℃ ◆ Equalize Charging Voltage:14.4V/28.8V
◆ Bulk Charging Voltage:14.2V/28.4V
◆ Float Charging:13.8V/27.6V
◆ Discharge Stop Voltage:11.2V/22.4V
◆ Discharge Reconnect Voltage:12.6V/25.2V
◆ Housing: Aluminum Alloy
◆ Maximum Wire Size:16AWG
◆ Size/Weight: 3.23* 2.94* 0.83in/0.27lb
Package Include:
● 1 X 10A Waterproof Solar Charge Controller
● 1 X English User Manual
type | POW-30AH-12.8V | POW-50AH-12.8V | POW-100AH-12.8V |
Nominal voltage | 12.8V | 12.8V | 12.8v |
Rated capacity | 30Ah(0.2C/25)℃(Min:29Ah) | 50Ah(0.2C/25)℃(Min:49Ah) | 100Ah (0.2C/25°C) (Min:96Ah) |
Operating voltage range | 10V-14.6V(Typical:12.8V) | 10V-14.6V(Typical:12.8V) | 10V~14.6V (Typical:12.8V) |
Charging voltage | 14.6V | 14.6V | 14.6v |
Dischange cut -off voltage | 10V | 10V | 10v |
Charging current(Max) | 15A | 25A | 50A |
Dischange current (Max) | 30A | 50A | 100A |
Length | 195mm | 228mm | 325mm |
Width | 133mm | 138mm | 170mm |
Height | 171mm | 210mm | 215mm |
Weight | about 4.5kg | about 6.2kg | About 11.5kg |
Shell | Plastics/Black | Plastics/Black | Plastics/Black |
Series | Maximum support for 4 sets in series | Maximum support for 4 sets in series | Maximum support for 4 sets in series |
Parallel | support | support | Support |
Alarm&potection | Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc | Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc | Over Voltage, Under Voltage, Over Current, Short Circuit etc. |
Cooling mode | Automatic cold and hot | Automatic cold and hot | Automatic cold and hot |
Terminal stud | M6 | M8 | M8 |
Altitude | ≤4000m | ≤4000m | <4000m |
Recommended operating charge temperature | 15℃-40℃ | 15℃-40℃ | 15%~85% |
Recommended operating dischage temperature | 15℃-40℃ | 15℃-40℃ | 0°C~50°C |
Recommended operating storagetemperature | -20℃-45℃ | -20℃-45℃ | -10°C~60°C |
Humidity | 15%-85% | 15%-85% | 15°C~40°C |
Operating Charge temperature | 0℃-50℃ | 0℃-50℃ | 15°C~40°C |
-10Operating Dischage temperature | -10℃-60℃ | -10℃-60℃ | -20°C~45°C |
- No Lithium Batteries Activation
- 12V
- Flooded Batteries
- Gel Batteries
- Lead-acid Batteries
- AGM Batteries
- 10 Amps
- Positive Ground
- 0-240W
- 50V
- USA Warehouse