EPever 30A MPPT Solar Charge Controller 12volt Solar Battery Charger 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN
EPever 30A MPPT Solar Charge Controller 12V 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN
Epever Mppt Solar Charge controller Features:
* User programmable for battery types, load control, etc.
* Multiple load control modes: manual control, light ON/OFF, light On+Timer, and test mode.
* LCD display design, dynamically displaying tool's operating data and working condition.
* 3-Stage charge with PWM Solar Charge Controller output
* Battery temperature compensation function.
* Real-time energy statistics function.
* Common positive grounding design
* RS485 port with industrial standard MODBUS open architecture
* Fully available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
* Support software upgrade.
* Warranty: lifelong warranty
Epever Mppt Solar Charge controllerElectronic protections:
• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over-discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Overheating protection
Package includes:
- 1*MPPT Solar Charge Controller Tracer 3210AN
- 1*English Manual
- Active Lithium Batteries
- 12V
- 24V
- Lifepo4 Batteries
- Lithium Batteries
- Flooded Batteries
- Gel Batteries
- Lead-acid Batteries
- AGM Batteries
- User Mode
- 30 Amps
- Netagive Ground
- 500W-1000W
- 100V
- AUS Warehouse
- GER Warehouse
- USA Warehouse
Question: | Is this a true mppt charge controller with a transformer in it? |
Answer: | yes it is true mppt with large transformer coil inside.2years warranty .5-8years lifetime. |
Question: | This wiil work with richsolar panel |
Answer: | yes |
Question: | If I am just using lights can I hook up ac lights to the load terminal? |
Answer: | sorry it can not.the outout from load terminal is dc.you need inverter to connect ac lights.(suggest connect inverter to the battery directly.not connect to load terminals) |
Question: | I want to run 2-3 light off of solar power can I use the output terminal for this or would I need an inverter? |
Answer: | yes you need an inverter |
Question: | Can this be installed vertically? And if so what clearance do I need in inches to supply enough airflow for cooling? |
Answer: | YES. Up, down, left and right recommended at least 5.90 inches. |
Question: | Regarding the load over discharge disconnect, is there a time delay before disconnect? ie, to wait out a quick temporary sag in voltage? |
Answer: | Dear customer, sorry, this controller doesn't have time delay function. |
Question: | What is the max wire guage that will fit in the terminals for the battery and inverter connections? |
Answer: | 6awg |
Question: | do have you to configure this for 12v or 24v or will it know that I'm 12v? does it have a default? |
Answer: | It will read your battery auto and use 12V or 24V default parameter charge your battery. |
Question: | Do you power the mppt PV or battery first? |
Answer: | Wire battery first, after controller LCD display power on, turn on your solar panel. |
Question: | where can we get software for PC programing? |
Answer: | you can download the software on epever official website or we can send you via mail. |
Question: | Can I connect in serie 3 panels of 300 watt and Vmp: 33V? |
Answer: | For 3210AN controller, Please note the below info: If your battery is 24V Solar panel: Max power DO Not exceed 1100W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . If your battery is 12V Solar panel: Max power DO Not exceed 580W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . 3 panels of 300 watt and Vmp 33V in serie,then your panel max power is 900W, Voltage is 99. In 24V battery, it is ok. But Voltage is too close the voltage threshold, not recommend. Suggest you parallel |
Question: | What's the Maximum 24v current at the load Terminal? |
Answer: | load Terminal share the same voltage with battery's voltage. |