MPPT Solar Charge Controller Waterproof 8A Solar Panel Controller For 48V 60V Lead Acid And Lithium Battery IP67 Step Up Charge

MPPT Solar Charge Controller Waterproof 8A Solar Panel Controller for 48V 60V Lead Acid And Lithium Battery IP67 Step Up Charge

InverterUse Note: The Battery Capacity OF The Correct Matching System Is Determined According To The Specific Usage Requirements OF The Load And Application Scenarios, Otherwise It will Easily Lead To Insufficient Battery Capacity Or Excessive Waste OF Power Generation.

For Details, Please Refer To The Manual Recommendation Or Consult Online Customer Service.PowMr Will Serve For You Everywhere

Overview:

The latest MovingTrack high efficiency boosting MPPT charging technology in the industry is adopted for HV6008N boosting waterproof type MPPT (Maximum Power Point Tracking) charging controller, which can guarantee the optimal status of solar panel and, realize charging to the maximum degree and effectively prolong the service life of storage battery. The product, which is mainly applied to the charging system of solar electric vehicles, is featured by high reliability, high efficiency, high accuracy, simple installation and convenient maintenance, etc.

Product characteristics：

1. All-waterproof encapsulation;  protection grade: IP 67; applicable to the electric vehicles' application environment with vibration and high humidity; it is guaranteed that the device has good heat dissipation and corrosion resistance.

2. The latest Moving TrackTMhigh efficiency MPPT technology that is specially researched and developed for mobile photovoltaic power generation systems is adopted; maximum power point tracking can be quickly realized during motion, and it will not suffer from the interference from unstable illumination to battery panel. MPPT efficiency reaches as high as 99.9%.

3.It supports the work of 16V ~ 50V battery panel, and the applicable scope is wider.

4. Lead acid battery and lithium battery is universal.

5. High efficiency and high-speed intelligent MCU digital power design are adopted; there is a wide voltage input range; self-adaption to the solar panel input voltage.

6. High-quality imported components and parts are adopted to improve the system efficiency, and the circuit switching efficiency is as high as 97%., There is a complete protection function for battery overcharging, reverse charging and reverse connection.

7. External jumper design is adopted; switching between 48V and 60V battery is easy; double-color LED is adopted to indicate the battery voltage.

8. It supports such a communication interfaces as RS232/ RS485, which is convenient for connecting another main control device.

9. The small volume is convenient for installation

Typical Curve:

Protection function

1. Over voltage protection for storage batter-over voltage protection for a storage battery, stop charging

2. Current limiting protection for output-Input 14V- 30V Output limiting current 4A -Input 30V-50V Output limiting current 8A

3. Open circuit protection for output-Controller will not be damaged

4. Waterproof protection-Waterproof level: IP67

5. Reverse connection protection for storage battery

6. Over voltage protection for photovoltaic input end

7. Reverse connection protection for photovoltaic input

8. Anti-reverse charging protection at night. It can prevent the storage battery from performing discharging via the battery panel at night.

Suggestion:

The solar charge controller shall not be used under overload conditions, and the maximum power of the 18V photovoltaic panel is 180W. If there are two 18V photovoltaic panels with a total power of exceeding 180W, please perform a series connection for the photovoltaic panels for use (36V), and the maximum power of the 36V photovoltaic panel is 360W. Please view the parameters at the back side of the photovoltaic panel before connection.

product photos: