Epever 30A 150V XTRA Series MPPT solar charge controller

Write a review
Ask a question
In stock
BrandEPever Lithium Battery Activation Active Lithium Batteries Battery Voltage12V, 24V, 36V, 48V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries Charging Current30 Amps Ground TypeNetagive Ground Solar Panel Max Input Power500W-1000W Solar Panel Max Input Voltage150V WarehouseGER Warehouse, USA Warehouse
Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 

    30Amp mppt solar charge controller

    XTRA Series  MPPT solar charge controller

    XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off-grid photovoltaic systems, with optional display units (XDB1/XDS1/XDS2).In order to maximize the energy harvest from PV arrays and simultaneously minimize the power loss within a wide range of operating conditions, the XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller has a limit protection function on charging current &charging power, as well as auto derating power operation at high temperatures; the above protection ensures the stability of the system even at exceeded rated PV power and over-temperature conditions. Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under dierent application requirements.XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of the battery and significantly improves the system performance. It also has extensive electronic protection for overcharge, over-discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the o-grid solar system.


    • Advanced MPPT technology & ultra-fast tracking speed is up to 99.5 % guaranteed
    • Maximum DC/DC transfer efficiency is as high as 98 %, full load transfer efficiency is up to 97.4 %
    • Wide MPP operating voltage range
    • Low-temperature protection and self activate the function for lithium battery charging
    • Limit charging power & current overrated range
    • Real-time energy statistics function
    • Multiple load work modes
    • Comprehensive electronic protection
    • Compatible with lead-acid and lithium-ion①batteries
    • Over-temperature protection and power degrading in higher temperature
    • Optional LCD display units (XDB1/XDS1/XDS2) and accessories 
    • High quality and low failure rate components of ST or IR to ensure the service life
    • Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol
    • Monitor and set the parameters via the APP or PC software 
    • Dustproof and waterproof design with IP32② protection class
    • CE certification(LVD IEC62109, EMC EN3/1-6-61000) 

    ① If using a Lithium battery, the customer should ask for help from “From PC software” to set the lithium battery parameters
    ② Ingress of solid objects: Protected against solid objects over 2.5mm 
    ② Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical

     Xtra mppt controller's charging parameter

    • System nominal voltage: 12/24/36/48VDC Auto(When a lithium battery is used, the system voltage can’t be identified automatically.)
    • Rated charge/discharge current: 30A
    • Battery voltage range: 8~32V
    • Max. PV open circuit voltage: 138V At 25℃/77°F environment temperature, 150V At minimum operating environment temperature
    • Max. PV input power: 1560W when the battery system is 48V,1170W when the battery system is 36V,780W when the battery system is 24V, 390W when the battery system is 12V.
    • Battery type: Lead-acid battery(Sealed/Gel/Flooded/User), Lithium battery(LiFePO4, Li(NiCoMn)O2, User)
    • Mounting dimension: 200×176mm with Φ5mm Mounting hole size
    • Recommended cable: 8AWG(10mm2)

    mppt solar charge controller
    • Accessories support: Remote Temperature Sensor/USB to RS485 cable/ MT50 Remote Meter/WIFI-eBox-WIFI-01/Bluetooth-eBox-BLE-01( all the accessories are optional, don't include)
    • Protection: PV Over Current/power, PV Short Circuit, Battery Over Voltage, Battery Over Discharge....etc
    • Temperature compensate coefficient: -3mV/℃/2V (Default)
    • Grounding: Common negative
    • Discharge circuit voltage drop: ≤0.23V
    • RS485 interface: 5VDC/200mA(RJ45)
    • LCD backlight time: Default:60S,Range:0~999S(0S:the backlight is ON all the time)
    • Working environment temperature: -25℃~+50℃
    • Relative humidity: ≤95%, N.C.
    • Enclosure: IP32(3-protection against solid objects: protected against solids objects over 2.5mm. 2-protection against liquids: protected against direct sprays up to 15°from the vertical)

    mppt solar charge controller
    epever controller xtracer

    mppt solar charge controller

    Xtra mppt controller's Load working modes
    • Manual Control (default)---Control ON/OFF of the load via the button or remote commands (e.g., APP or PC software).
    • light ON/OFF---Set your own's turn ON/OFF voltage, once your solar panel's voltage reach this value, your load will be ON/OFF, ON voltage=sunset; OFF voltage=sunrise
    • Time Control---Control the load ON/OFF time by setting the real-time clock.
    • Light ON+ Timer---Two working time periods can be set; e.g. 101: Load will be ON about 1 hour after sunset; 201 means Load will be ON about 1 hour before sunrise


    Advanced MPPT control 40amp

    XTRA N series controller
    • it can minimize the maximum power point loss rate and loss time, quickly track the maximum power point(MPP) of the PV array and obtain the maximum energy from the solar array under any conditions
    • Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol.


    mppt controller
    • IP33
    • CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
    • Limit charging power & current overrated value
    • Power reduction automatically over-temperature value
    • Support monitoring and setting the parameters via the APP or PC software
    • Common negative Grounding
    Lithium battery note
    • When a lithium battery is used, the system voltage can’t be identified automatically.
    • When a lithium battery is used, the temperature compensation coefficient must be 0, and can’t be changed.


    30a mppt controller


    1. Turn the adjusting terminal counterclockwise, Insert your wire into the new opening between the plate and the "top" of the terminal hole.
    2. Make sure your battery must be at least 60% charged prior to connecting to the controller, or the controller can't read your battery correctly.
    3. Connect the battery to the controller first!! (When LCD power is on, means the controller reads the battery successfully, if not please reconnect it.)
    4. Connect your solar panel array to the controller after Controller's LCD power is on.
    5. Never connect your solar panel array to the controller when the LCD display doesn't power on(Which means your battery does not connect successfully).
    6. Careful your input power and voltage do not exceed the max.
    7. Do not reverse the polarity when wiring.
    8. Lithium battery setting only can be parameterized via Phone apps or PC software. (Accessories optional, don't include)

    Please read the specification carefully before install

    Item XTRA1206N XTRA2206N XTRA1210N XTRA2210N XTRA 3210N XTRA4210N XTRA3215N XTRA  4215N XTRA3415N XTRA4415N
    System Nominal Voltage 12/24VDC① Auto 12/24/36/48VDC① Auto
    Rated Charge Current 10A 20A 10A 20A 30A 40A 30A 40A 30A 40A
    Rated Discharge Current 10A 20A 10A 20A 30A 40A 30A 40A 30A 40A
    Battery Voltage Range 8~32V 8~68V
    Max. PV Open Circuit Voltage 60V ② 100V ② 150V ②
    46V ③ 92V ③ 138V ③
    MPPT Voltage Range (Battery voltage +2V)~36V (Battery voltage +2V)~72V (Battery voltage +2V)~108V
    Max. PV Input Power (W/V) 130/12  260/24 260/12 520/24 130/12  260/24 260/12 520/24 390/12  780/24 520/12 1040/24 390/12 780/24 520/12 1040/24 390/12 780/24 1170/36 1560/48 520/12 1040/24 1560/36 2080/48
    Equalization Voltage ④ Sealed: 14.6V; Flooded: 14.8V; User: 17~9V
    Boost Voltage ④ Gel:14.2V; Sealed:14.4V; Flooded:14.6V; User: 17-9V
    Float Voltage ④ Gel /Sealed /Flooded: 13.8V; User: 17~9V
    Low Voltage Reconnect Voltage ④ Gel /Sealed /Flooded: 12.6V; User: 17~9V
    Low Voltage Disconnect Voltage ④ Gel /Sealed /Flooded: 11.1V; User: 17~9V
    ≤14mA(12V) ≤35mA(12V) ≤35mA(12V)   ≤16mA(36V)
    Self-consumption ≤15mA(24V) ≤22mA(24V) ≤22mA(24V)   ≤16mA(48V)
    Discharge circuit voltage drop ≤0.23V
    Temperature Compensate coefcient ⑤ -3mV/0C/2V (Default)
    Grounding Common negative grounding
    RS485 interface 5VDC/200mA (RJ45)
    LCD backlight time 60S (Default)
    Working environment temperature ⑥ (full rated power with no derating) -25℃~+50℃(LCD);-30℃~+50℃(No LCD)
    Storage temp. range -200C~+700C
    Relative humidity ≤ 95% , N.C.
    Enclosure IP33 ⑦
    Pollution degree PD2
    Item XTRA1206N XTRA2206N XTRA1210N XTRA2210N XTRA 3210N XTRA4210N XTRA3215N XTRA  4215N XTRA3415N XTRA4415N
    Safety EN/IEC62109-1
    EMC(Emission immunity) EN61000-6-3/EN61000-6-1
    FCC 47 CFR Part 15, Subpart  B
    Performance &function IEC62509
    ROHS IEC62321-3-1
    Item XTRA 1206N XTRA 2206N XTRA 3210N XTRA 4210N XTRA 3415N XTRA 4415N
    XTRA 1210N XTRA 2210N XTRA 3215N XTRA 4215N
    Dimension(mm) 175×143×48 217×158×56.5 230×165×63 255×185×67.8 255×187×75.7 255×189×83.2
    Mounting dimension(mm) 120×134 160×149 173×156 200×176 200×178 200×180
    Mounting hole size Φ5mm
    Terminal 12AWG(4mm2) 6AWG(16mm2)
    Recommended cable 12AWG(4mm2) 10AWG(6mm2) 8AWG(10mm2) 6AWG(16mm2) 8AWG(16mm2) 6AWG(16mm2)
    Weight 0.57kg 0.96kg 1.31kg 1.70kg 2.07kg 2.47kg
    Brand information
    Brand :
    Battery Information for inverters and controllers
    Lithium Battery Activation :
    • Active Lithium Batteries
    Battery Voltage :
    • 12V
    • 24V
    • 36V
    • 48V
    Battery Type :
    • Lifepo4 Batteries
    • Lithium Batteries
    • Flooded Batteries
    • Gel Batteries
    • Lead-acid Batteries
    • AGM Batteries
    Solar Charge Controllers Features
    Charging Current:
    • 30 Amps
    Ground Type:
    • Netagive Ground
    Solar Panel Max Input Power:
    • 500W-1000W
    Solar Panel Max Input Voltage:
    • 150V
    Other Information
    • GER Warehouse
    • USA Warehouse
    Find similar

    No reviews found

    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase