EPever 12V 30A MPPT Solar Charge Controller 12volt Solar Battery Charger 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN

Write a review
Ask a question
In stock
BrandEPever Lithium Battery Activation Active Lithium Batteries Battery Voltage12V, 24V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries, User Mode Charging Current30 Amps Ground TypeNetagive Ground Solar Panel Max Input Power500W-1000W Solar Panel Max Input Voltage100V WarehouseAUS Warehouse, GER Warehouse, USA Warehouse
Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 

    EPever 30A MPPT Solar Charge Controller 12V 390W 24V 780W Auto Solar Charge Regulator with LCD Display Tracer3210AN


    * User programmable for battery types, load control, etc.

    * Multiple load control modes: manual control, light ON/OFF, light On+Timer, and test mode.

    * LCD display design, dynamically displaying tool's operating data and working condition.

    * 3-Stage charge with PWM Solar Charge Controller output

    * Battery temperature compensation function.

    * Real-time energy statistics function.

    * Common positive grounding design

    * RS485 port with industrial standard MODBUS open architecture

    * Fully available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting. Features

    * Support software upgrade.

    * Warranty: lifelong warranty

    Electronic protections:

    • PV reverse polarity protection

    • PV short circuit protection

    • PV over current alarm protection

    • Battery overcharge protection

    • Battery over-discharge protection

    • Battery reverse polarity protection

    • Load short circuit protection

    • Load overload protection

    • Overheating protection

    Package includes:

    Datasheet--- (EPever_Tracer-AN_10-40A__Datasheet.pdf, 283 Kb) [Download]

    User Manual (EPever_Tracer-AN_10-40A__User_Manual.pdf, 1,901 Kb) [Download]

    Certificate--- (EPever_Tracer-AN_10-40A__ROHS_Certificate.pdf, 742 Kb) [Download]

    Certificate--- (EPever_Tracer-AN_10-40A__CE_Certificate.pdf, 44 Kb) [Download]

    Brand information
    Brand :
    Battery Information for inverters and controllers
    Lithium Battery Activation :
    • Active Lithium Batteries
    Battery Voltage :
    • 12V
    • 24V
    Battery Type :
    • Lifepo4 Batteries
    • Lithium Batteries
    • Flooded Batteries
    • Gel Batteries
    • Lead-acid Batteries
    • AGM Batteries
    • User Mode
    Solar Charge Controllers Features
    Charging Current:
    • 30 Amps
    Ground Type:
    • Netagive Ground
    Solar Panel Max Input Power:
    • 500W-1000W
    Solar Panel Max Input Voltage:
    • 100V
    Other Information
    • AUS Warehouse
    • GER Warehouse
    • USA Warehouse
    Find similar
    Question: Is this a true mppt charge controller with a transformer in it?
    Answer: yes it is true mppt with large transformer coil inside.2years warranty .5-8years lifetime.
    Question: This wiil work with richsolar panel
    Answer: yes
    Question: If I am just using lights can I hook up ac lights to the load terminal?
    Answer: sorry it can not.the outout from load terminal is dc.you need inverter to connect ac lights.(suggest connect inverter to the battery directly.not connect to load terminals)
    Question: I want to run 2-3 light off of solar power can I use the output terminal for this or would I need an inverter?
    Answer: yes you need an inverter
    Question: Can this be installed vertically? And if so what clearance do I need in inches to supply enough airflow for cooling?
    Answer: YES. Up, down, left and right recommended at least 5.90 inches.
    Question: Regarding the load over discharge disconnect, is there a time delay before disconnect? ie, to wait out a quick temporary sag in voltage?
    Answer: Dear customer, sorry, this controller doesn't have time delay function.
    Question: What is the max wire guage that will fit in the terminals for the battery and inverter connections?
    Answer: 6awg
    Question: do have you to configure this for 12v or 24v or will it know that I'm 12v? does it have a default?
    Answer: It will read your battery auto and use 12V or 24V default parameter charge your battery.
    Question: Do you power the mppt PV or battery first?
    Answer: Wire battery first, after controller LCD display power on, turn on your solar panel.
    Question: where can we get software for PC programing?
    Answer: you can download the software on epever official website or we can send you via mail.
    Question: Can I connect in serie 3 panels of 300 watt and Vmp: 33V?
    Answer: For 3210AN controller, Please note the below info: If your battery is 24V Solar panel: Max power DO Not exceed 1100W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . If your battery is 12V Solar panel: Max power DO Not exceed 580W, Max Voltage DO Not exceed 100V, 92V in 77℉ surrounding . 3 panels of 300 watt and Vmp 33V in serie,then your panel max power is 900W, Voltage is 99. In 24V battery, it is ok. But Voltage is too close the voltage threshold, not recommend. Suggest you parallel 
    Question: What's the Maximum 24v current at the load Terminal?
    Answer: load Terminal share the same voltage with battery's voltage.

    5 out of 5
    Reviews: 1
    5 stars
    4 stars
    3 stars
    2 stars
    1 star
    Charles White
    United States
    Received very fast in 13 days the seller is great
    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase