40A EPEVER MPPT Solar Regulator Charge DC 12/24V Lithium Battery Auto PV 100V US Stock

US Stock, only send to US, otherwise send from China.

List price: $166.99
$148.99
You save: $18.00 (11%)
Price in points: 149 points
4210AN-US
In stock
+

Minimum quantity for "40A EPEVER MPPT Solar Regulator Charge DC 12/24V Lithium Battery Auto PV 100V US Stock" is 1.

Overview:
The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducing charging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.

With the adaptive three-stage charging mode based on a digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of batteries, significantly improve the system performance and support all-around electronic protection functions, including overcharging and over discharging protection to minimize damages to components of the system caused by incorrect installation or system failure at the utmost, and effectively ensure safer and more reliable operation of the solar power supply system for a longer service time. This modular solar controller can be widely used for different applications, e.g., Communication base stations, household systems, and field monitoring, etc.

Features

  • Advanced MPPT technology, with efficiency no less than 99.5%
  • Ultra-fast tracking speed and guaranteed tracking efficiency
  • Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
  • Wide MPP operating voltage range
  • High quality components, perfecting system performance, with maximum conversion efficiency of 98%
  • Accurate recognition and tracking of multiple-peaks maximum power point
  • International famous brands of ST and IR's componentsof high quality and low failure rate are used, which can ensure the product’s service life
  • Charging power and current limitation function
  • Compatible with lead-acid and lithium-ion batteries
  • Battery temperature compensation function
  • Real-time energy statistics function
  • Overheating power reduction function
  • Multiple load work modes
  • The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
  • With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
  • Monitor and set the parameters via mobile phone APP or PC software
  • Full-load operation without any drop in capacity within the range of working environment temperature
  • Extensive electronic protection
Package include:
1x40A MPPT solar controller

1x User manual

Please confirm the specification before install

Electrical Parameters

Item

Tracer1210AN

Tracer2210AN

Tracer3210AN

Tracer4210AN

System nominal voltage

12/24VDC Auto

Rated charge current

10A

20A

30A

40A

Rated discharge current

10A

20A

30A

40A

Battery voltage range

8~32V

Max. PV open circuit voltage

100V92V

MPP voltage range

(Battery voltage +2V)~72V

Max. PV input power

130W/12V

260W/24V

260W/12V

520W/24V

390W/12V

780W/24V

520W/12V

1040W/24V

Self-consumption

≤12mA

Discharge circuit voltage drop

≤0.23V

Temperature compensate coefficient

-3mV/℃/2V (Default)

Grounding

Common negative

RS485 interface

5VDC/100mA

LCD backlight time

60S (Default)


Correct Connecting Order : Battery - solar panel - load

Disconnect : solar panel - battery - load