Features:
1, LCD screen display,
2, Easy operation interface,
3, PWM charging mode+MPPT,
4, Parameter user can reset,
5, A key to open and close the load,
6, A key to restore the factory settings,
7, Battery reverse discharge protection,
8, Battery reverse polarity protection
9, Battery under voltage protection,
10, Overload, short-circuit protection,
11, Automatic temperature compensation function,
12, Can charge and discharge at the same time, Always keep the battery in full status
13, USB 5V charge (current 1500mA) Optional
overview:
- This is a three-time controller into the evening(evening)working time,an interval of rest or pause time,Dawn working time(morning light function),the user can according to their needs,set a different time:
- A:time(evening working)
- B:time(Pause working)
- C:time(dawn working)
- This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving,he not only has efficient MPPT controller charging function to automatically track the maximum power point,10%-30% higher than the ordinary controller chargingefficiency,also has standby energy saving,more than 30% energy than ordinary controller,the standby power consumption of only 10mA-15mA.
|
Product introduction: "T"series of an intelligent,multi-purpose solar charge controller | LCD Screen display | Battery reverse discharge protection | | Simple(and more time control) operation | Battery reverse polarity protection | | PWM charing mode+MPPT | Battery under voltage protection | | Parameter user can reset | Overload,short-circuit protection | | A key to open and close the load | Automatic Temperature compensation function | | A key to restore the factory setting | USB 5V charge(current 1500mA/1.5A)Optional |
|
Parameter table: Parameters/Model | MPPT T-10 | MPPT T-20 | MPPT T-30 | MPPT T-40 | MPPT T-60 | MPPT T-80 |
|---|
Maximum Power Current | 12A | 20A | 30A | 40A | 60A | 80A |
|---|
Installation Lin(mm2) | 4mm2 | 8mm2 | 10mm2 | 12mm2 | 16mm2 | 20mm2 |
|---|
Installaton Line(AWG) | 10#(AWG) | 8#(AWG) | 7#(AWG) | 6#(AWG) | 4#(AWG) | 2#(AWG) |
|---|
Weight | 280g | 300g | 475g | 500g | 800g | 900g |
|---|
Peak power of solar cell panel (Max Wp) | 130W | 260W | 380W | 500W | 800W | 1000W |
|---|
Battery capacity configuration | 100AH | 200AH | 300AH | 400AH | 600AH | 800AH |
|---|
Dimensions | 143*89*46(mm) | 187*97*61(mm) | 188*128*61(mm) |
|---|
Battery float voltage | 13.8V(12V system)/27.6V(24V system) |
|---|
Battery (under voltage) protection | 10.6V(12V system)/21.2V(24V system) |
|---|
Battery(under voltage)recovery voltage | 12.6V(12V system)/25.2V(24V system) |
|---|
System load loss:<=13mA | Loop Buck;<=100mV |
|---|
Operation Temperature :-10°C~60°C | Storage Temperature :-30°C~-70°C |
|---|
Operation Temperature :<=90%,No condensation | Temperature compensation :-4mV/Cell/°C |
|---|
Maximum open circuit voltage of the solar panel | 18V~24V(12V system) 36V~48V(24V system) |
|---|
Solar Panel maximum open circuit voltage | <=48V |
|---|
|
Package contents:
1* 80A/60A MPPT Solar Controller
1* English User Manual
1* Temp Sensor
Notice: this is not ture MPPT controller, it is named MPPT 60/80A.
Please confirm the specification before install
Correct Connecting Order : Battery - solar panel - load
Disconnect : solar panel - battery - load
