2000W Solar On Grid Tie Inverter MPPT For DC 45-90V PV System LCD Pure Sine Wave✔Limiter ✔2years Warranty✔ AU STOCK

PowMr UK warehouse,AUS warehouse,USA warehouse,GER warehouse and China warehouse

List price: $375.99
You save: $35.00 (9%)
Shipping Item(s) From China Warehouse When Outstock In Location Warehouse
Price in points: 341 points
In stock

Minimum quantity for "2000W Solar On Grid Tie Inverter MPPT For DC 45-90V PV System LCD Pure Sine Wave✔Limiter ✔2years Warranty✔ AU STOCK" is 1.

Introduction of Sunshine Grid Tie Inverter

Sunshine Grid Tie Power Inverter is the world ’ s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and opera-tion of the Sunshine Grid Tie Inverter.
This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management.
The small type solar grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable.
We call the system combining with small solar grid tie inverter and solar panels as ‘SGPV’. The system includes solar panels and small type grid tie inverter and installation kit. Solar panels can be mono silicon, polygon silicon, non-crystal film or any other material that can transform solar energy to electric energy. The power of grid tie inverter should be matched to the power of solar panels connected. So the power of SGPV is defined by its solar panels, it can be standardization according to the actual using.
The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid's, and the volume is a bit higher than the grid's, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on.
When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid.
Advantage of the 2G grid tie inverter ?
1. the 2nd Generation grid tie inverter, new technical , Higher efficiency .
2. Higher MPPT efficiency , Max 99%
3. Multiple intelligent protection to ensure safe use.
4. Wide DC input voltage , suitable for all types solar panels .
5. Easy to install and easy to operate.
6. UL1741, IEEE1547, VDE4105 standards .
7. Two years Warranty , life time technical support .
8. Power Limiter function , Battery discharge function support .
9. Pure sine wave form output , THD < 5% .
Installation Procedure
Installing Sunshine Grid Tie Power System involves several key steps:
1. Considering the total capacity of the grid tie power system that you need.
2. Choosing applicable solar panels for Sunshine Grid Tie Inverter.
3. Selecting accessory for installation of the Grid Tie Power System .
4. Selecting correct model of Sunshine Grid Tie Inverter.
5. Installing solar panels to suitable place.
6. Installing Sunshine Grid Tie Inverter to suitable place.
7. Connecting Sunshine Grid Tie Power System with cables and connectors.
8. Grounding the system.
9. Completing Sunshine installation map and Connecting the PV modules.
we can see that method 2 is the good choice, because with method 1, the DC cables is more thick, so it is more expensive, and three pairs of connectors for parallel connecting plus three pairs of MC4 connectors should be used.
But with method 2, the DC cables is thin, and just a pair of connectors for parallel connecting and a pair of MC4 connector should be used.
Installing Sunshine Grid Tie Power System to Three Phases Utility Grid
For example, installing a 3KW grid tie power system to three phase utility grid.as the picture shows, we seperate 3KW power sytem to three power system units,every unit has 1KW power. Connecting every system unit to different phase, this can balance all grid tie power to three phases of the utility grid.Fllow this way, you can install more large grid tie power system to three phases, just seperate the whole power system to three equal power system units.
Layout of Sunshine Grid Tie Power Inverter
①.DC Input Positive Terminal. This terminal will connect to the positive wire of solar cables that connected with the positive pole of the solar panels.
②.DC Input Negative Terminal. This terminal will connect to the negative wire of solar cables that connected with the negative pole of the solar panels.
③.AC socket,This socket will connect the inverter to the public grid via the AC cable.
④⑤.Cooling fans.
Outline Drawing of SUN Series Grid Tie Power Inverter




Continuous Power Output



Peak Power Output



Input DC Voltage Range

22V-65V/45V ~ 90V

Peak power tracking voltage


AC Output Voltage Range

90V-140V/190V ~ 260V

Output Frequency


Standby Power Consumption


Total Harmonic Distortion


Peak Inverter Efficiency


MPPT Efficiency


Power Factor


Output Wave Form

Pure Sine Wave

MPPT Function


Over Current Protection


Over Temperature Protection


Reverse Polarity Protection


Anti-Island Protection




Weight ( Kg)



SUN-1000G2-LCD:AC110V/220V output automatic
SUN-2000G2-LCD:Only supports AC220V output
LCD Display
Inverter-1pcsPower Cable-1pcsEnglish Manual-1pcsLimiter ✔

Please confirm the specification before install

Correct Connecting Order : Battery - solar panel - load

Disconnect : solar panel - battery - load

User Manual (Temank-Power-Inverter-JYP-1000W-12-11-manual.pdf, 18,553 Kb) [Download]