Powmr 10KW 15KW Solar Hybrid PV Inverter Parrallel 6 Units With 3 Phase

PowMr UK warehouse,AUS warehouse,USA warehouse,GER warehouse and China warehouse

Contact us for a price
Shipping Item(s) From China Warehouse If Outstock In Location Warehouse
POW-10KW-15KW-3-PHASE
In stock

Minimum quantity for "Powmr 10KW 15KW Solar Hybrid PV Inverter Parrallel 6 Units With 3 Phase" is 1.

Powmr 10KW 15KW Solar Hybrid PV Inverter Parrallel 6 Units With 3 Phase

Overviews

This hybrid PV inverter can provide power to connected loads by utilizing PV power, utility power and battery power. The hybrid PV inverter is a hybrid inverter which combines solar system,AC utility,and battery power source to supply continuous power.It is suitable for remote areas where the cost of utility is too high or emergency usage when utility is not stable.

Feature

  • Brand: Powmr
  • Product Model: POW-10KW-15KW-3-PHASE
  • Pure sine wave output
  • Self-consumption and Feed-in to to the grid.
  • Programmable supply priority for PV,Battery or Grid
  • User-adjustable battery charging current suits different types of batteries
  • Probgrammable multiple operation modes:Grid-tie,off-grid and grid tie with backup
  • Built-in timer for various mode of on/off operation
  • Multiple communication for USB,RS-232,Modbus and SNMP
  • Monitoring software for real-time status display and control
  • Parrallel operation up to 6 units.

Product Instruction:

Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge battery. This inverter is only compatible with PV module types of single crystalline and poly crystalline. Do not connect any PV array types other than these two types of PV modules to the inverter. Do not connect the positive or negative terminal of the solar panel to the ground. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter

Note: By following the EEG standard, every inverter sold to German area is not allowed to charge battery from Utility. The relevant function is automatically disabled by the software.


Product Overview


  1. LCD display panel
  2. Operation buttons
  3. AC Grid connectors
  4. AC output connectors (Load connection)
  5. PV connectors
  6. DC Switch
  7. Battery thermal sensor
  8. EPO
  9. Current sharing port
  10. Relay control port
  11. Dry contact
  12. USB communication port
  13. RS-232 communication port
  14. Parallel communication port
  15. Intelligent slot
  16. Battery connectors
  17. Connector for surge protective device (Reserve)

Inverters Configuration

Two inverters in parallel:

Three inverters in parallel:

Four inverters in parallel:

Five inverters in parallel:


Six inverters in parallel:




Product Specifications

Correct Connecting Order : Battery - solar panel - load

Disconnect : solar panel - battery - load



User Manual (Powmr-10K-15K-manual.pdf, 4,792 Kb) [Download]