EPEVER UPower series is 2018 new type of the inverter/charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
● Adoption of the advanced SPWM technology, with pure sine wave output.
● Fully digitalized voltage and current double closed-loop control.
● Advanced MPPT technology, with efficiency no less than 99.5%.
● Four charging mode: Solar priority, Utility priority, Utility & solar and Solar.
● Two OUTPUT mode: Battery and Utility.
● LCD design that enables dynamic display of system running data and operating state.
● Provided with common interface and advanced interface.
● Multiple LED indicators that instantly indicate the operating state of the system.
● 2P circuit breaker provided at the utility input end.
● Independent control of AC output with AC OUT button .
● Battery temperature compensation function.
● Extensive Electronic protection.
|System battery voltage||24VDC|
|Battery input voltage range||21.6～32VDC|
|Continuous output power||2400W||2400W||2400W||2400W|
|Output power (15min.)||3000W||3000W||3000W||3000W|
|Max. surge power||6000W||6000W||6000W||6000W|
|Output voltage range||220VAC±3%,230VAC(-7%～+3%)|
|Output wave||Pure Sine Wave|
|Distortion THD||≤3%(12V or 24V resistive load)|
|Utility input voltage range||160VAC～280VAC(Working voltage range)
170VAC～270VAC(Utility starting voltage range)
|Max. utility charge current||30A||30A||30A||30A|
|Max. PV open circuit voltage||100V
|Max. PV input power||780W||1500W||1040W||3000W|
|Max. PV charging current||30A||60A||20A||60A|
|Charging conversion efficiency||≤98%||≤98%|
|Temperature compensate coefficient||-3mV/℃/2V (Default)|
|No load consumption||≤0.8A||≤0.8A||≤0.6A||≤0.6A|
|Relative humidity||< 95% (N.C.)|
|-20℃～50℃（100% input and output）|
|Mounting hole size||Φ8mm|
|★At minimum operating environment temperature
◆At 25℃ environment temperature
Correct Connecting Order : Battery - solar panel - load
Disconnect : solar panel - battery - load