EPEVER 1500Watt DC 12V AC 110V Solar Power Inverters IP1500-11-Plus(T)

Write a review
Ask a question
In stock

Minimum quantity for "EPEVER 1500Watt DC 12V AC 110V Solar Power Inverters IP1500-11-Plus(T)" is 1.

Why PowMr?
  • — 24 months warranty
  • — Fast Delivery
  • — Free Shipping 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
BrandEPever Battery Voltage12V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries PhaseSingle Phase Inverter TypeHigh frequency Inverters AC output110/120Vac±5% Rated Load Power1500W

1500W Inverter

Feature-EPEVER IP Plus series Inverter(1500W 12V inverter)


IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS 
(Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The inverter selects key components with a high power density and long lifespan to 
provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV 
power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.


Completely electrically isolated design for input and output
Full digital double closed-loop control 
Excellent EMC characteristic, widely applied to higher quality power system
Advanced SPWM technology and pure sine wave output.
Input surge current suppression technology, applying to the lithium battery system
Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
High power density and high-quality components to ensure the reliability
Output power factor up to 1
Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency
Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating
Air cooling controlled by temperature and load
Rotatable LCD meter to simplify the system wiring
Friendly LCD meter to simply monitor and parameter configure
Remote control by the phone Apps and PC software 
Configurable output voltage and output frequency①
Charging mobile phones, DC fans, and other electrical equipment by the USB port② 
Support a variety of options by connecting with the RS485 com. port③
External switch contact design to allow remote control
IEC62109, EN61000, RoHS approved

① Configuring the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.
② This function is unavailable for inverters with 48V input voltage.
③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.

IPower-Plus  is  a  high-frequency  pure  sine  wave  inverter  that  can  convert  12/24/48VDC  to  220/230V  AC  (or  110V/120V  AC)  and  power  the  AC  loads.  
It  is  designed  according  to  the  international  standard  with  higher  quality,  reliability, and safety. Ranging from 500W to 5000W, 
Ipower-Plus is compatible with lithium-ion battery perfectly and suits any situation of DC to AC, such as RVs, boats, residentials, and places where require high quality of electrical power.

epever inverter

epever inverter

epever inverter

Advanced SPWM technology

Cooling Fan inside

Rotatable LCD meter

Specifications 1500W 12V inverter, output 110Vac

Continuous output power1500W@35℃@Rated input voltage
Surge power3000W@5S
Surge current when power on<100A
Output voltage110VAC(±3%); 120VAC(-7%~+3%)
Output frequency50/60Hz±0.2>%
Output wavePure Sine Wave
Output distortion THD
0.2~1(VA≤output continuous power)
Rated input voltage12VDC
Input voltage range10.8~16.0VDC
Rated output efficiency>88%
Max. output efficiency>93%(30% loads)
No-load current<1.0A
RS485 com. port5VDC/ 200mA
USB output5VDC/ Max.1A
Input terminalM6 / Φ6mm Mounting Holes


12V inverter

  1. breaker at the inverter input terminal or the fuse at the battery end is necessary.
  2. To ensure natural thermal convection, you should install the inverter in a place with sufficient air-flow and a minimum clearance of 150mm from the inverter's upper and lower edges.
  3. The AC loads shall be determined by the continuous output power of the inverter.
  4. The AC load's surge power must be lower than the instantaneous surge power of the inverter, or the inverter will be damaged.
  5. DC Recommend Wire size: 25mm2/3AWG*2 Circuit breaker: DC-100A(2P in parallel)
  6. AC Recommend Wire size: 4mm2/11AWG Circuit breaker: AC/2P-25A
  7. AC output terminal: recommended to use a multi-stranded wire with a wire diameter of not more than 4mm2.

  • When wiring: Direct insertion without screwdriver.Add solder to the connection point when selecting the multi-stranded wire, and directly insert it into the corresponding port.
  • when emoving the wiring, Stop the inverter then insert a sharp tool into the small hole(on the top of the wiring port) and pull out the wiring forcefully.
Parameters IP1500-11-Plus(T) IP1500-12-Plus(T)
Continuous output power 1500W@35@Rated input voltage
Surge power 3000W@5S
Surge current when power on 100A
Output voltage 110VAC(±3%); 220VAC(±3%);
120VAC(-7%~+3%) 230VAC(-7%~+3%)
Output frequency 50/60Hz±0.2%
Output wave Pure Sine Wave
Output distortion THD THD≤4%(Resistive load) THD≤3%(Resistive load)
Load power factor 0.2~1(VA≤output continuous power)
Rated input voltage 12VDC
Input voltage range 10.8~16.0VDC
Rated output efficiency 88% 89%
Max. output efficiency 93%(30% loads)
Idle current 0.2A
No-load current 1.0A@12V 1.2A@12V
USB output 5VDC/ Max.1A
RS485 com. port 5VDC/ 200mA
Mechanical parameters
Input terminal M6
Dimension (Length x Width x Height) 387×231.5×123mm
Mounting dimension 361×145mm
Mounting Holes Φ6mm
Net Weight 6kg
Working temperature -20~+60(Refer to the Reduced capacity curve)
Storage temperature -35~ +70
Relative humidity < 95%(N.C.)
Enclosure IP20
Altitude 5000m (If the altitude is more than 1000 meters, the rated power will be reduced according to GB7260.)
 It means the rated output efficiency when the load power is continuous output power under the rated DC input voltage. (25 )
 It means the max. output efficiency when the inverter is connected with different loads under the rated DC input voltage.

Brand information
Brand :
Battery Information for inverters and controllers
Battery Voltage :
  • 12V
Battery Type :
  • Lifepo4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • Gel Batteries
  • Lead-acid Batteries
  • AGM Batteries
Inverter Information
Inverter Type:
  • High frequency Inverters
Load workout with Battery:
Parallel Function:
  • Single Phase
Split Phase:
AC output:
  • 110/120Vac±5%
Rated Load Power:
  • 1500W
Find similar

No reviews found

You May Also Like
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We only offer quality goods with higher cost performance

Returns within 30 days

You have 30 days to test your purchase