Growatt 15KW 220Vac/380Vac three phase Solar All In One Inverter 100A MPPT Charger Controller SPF 5000 ES*3

5000es

3pcs Growatt 5000W All In One Solar Inverter Charger With MPPT 100A Solar Controller Battery Regulator DC 48V System Output AC 220Vac/380Vac three-phase Max Input PV 450V Parallel 6 Unit

The second generation of Growatt SPF 5000TL HVM-WPV-P

Product description

Overview

This is a multifunctional off-grid solar inverter, integrated with an MPPT solar charge controller,
a high-frequency pure sine wave inverter, and a UPS function module in one machine,
which is perfect for off-grid backup power and self-consumption applications. This inverter can work with or without batteries.

Features

Rated power 3.5KW to 5KW, power factor 1
MPPT ranges 120V~430V, 450Voc
High-frequency inverter with small size and lightweight
Pure sine wave AC output
Solar and utility grid can power loads at the same time
With CAN/RS485 for BMS communication
With the ability to work without a battery
Parallel operation up to 6 units (only with the battery connected)
WIFI/ GPRS remote monitoring (optional)
Rated Output Power: 5KVA/5KW all in one inverter
Output Voltage Waveform: Pure Sine Wave
Output Voltage Regulation: 230Vac±5%
Output Frequency: 50Hz
Peak Efficiency: 93%
Overload Protection: 5s when ≥150% load; 10s when 110%~150% load
Surge Capacity: 2* rated power for 5 seconds
Nominal DC Input Voltage: 48Vdc
Cold Start Voltage(Lead-Acid Mode): 46.0Vdc
Cold Start SOC(Li Mode): Default 30%, Low DC Cut-off SOC +10%
Low DC Warning Voltage (Lead-Acid Mode: 44.0Vdc when load<20%,42.8Vdc when 20% ≤ load <50% 40.4Vdc when load ≥ 50%br> Notice: This inverter can work without a battery, it can work with solar panels/AC power only-no battery.

WARNING! Be sure that all inverters will share the same battery bank. Otherwise, the inverters will transfer to fault mode.

5000ES

Utility Charging Mode

Charging Algorithm: 3-Step
Max. AC Charging Current: 80Amp
Floating Charging Voltage: 54Vdc
Safety Certification： CE
Operating Temperature Range： 0℃ to 55℃
Storage temperature：-15℃~ 60℃
Dimension(D*W*H) : 485 x 330 x 135 mm
Net Weight: 12kg

Package

The 5000W ES unit x 3
User manual x 3
Communication cable x 3
Software CD x 3
Current sharing cable x 3
Parallel communication cable x 3

Nominal DC Input Voltage: 48Vdc

Surge Capacity: 2* rated power for 5 seconds

500

MPPT Solar Charging Mode

Max. PV Array Power: 6000W
Max. PV Input Current: 18A(PV to the inverter)
Start-up Voltage: 150Vdc±10Vdc
Max. PV Array Open Circuit Voltage: 450Vdc
Max. PV Charging Current: 100A (inverter to the battery)
Max. Charging Current (AC Charger Plus Solar Charger): 100A

WARNING：

Do not mount the inverter on flammable construction materials.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
Requested to install a separate DC over-current protector or disconnect device between battery and inverter.
All wiring must be performed by a qualified person.
It's very important for system safety and efficient operation to use the appropriate cable for battery connection. To reduce the risk of injury, please use the 2AWG cable. Max torque of 2Nm
(Single phase 220V AC /A Hot Leg Output, NOT Support 110V !!! )

Specifications
Table 1 Line Mode Specifications
INVERTER MODEL	SPF 3500 ES	SPF 5000 ES
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V (UPS); 90Vac±7V (Appliances)
Low Loss Return Voltage	180Vac±7V (UPS); 100Vac±7V (Appliances)
High Loss Voltage	280Vac±7V
High Loss Return Voltage	270Vac±7V
Max AC Input Voltage	300Vac
Nominal Input Frequency	50Hz / 60Hz (Auto-detection)
Low Loss Frequency	40±1Hz
Low Loss Return Frequency	42±1Hz
High Loss Frequency	65±1Hz
High Loss Return Frequency	63±1Hz
Output Short Circuit Protection	Circuit Breaker
Efficiency (Line Mode)	>95% ( Rated R load, battery full charged )
Transfer Time	10ms typical, 20ms Max@ Single <30ms @ Parallel

Table 2 Inverter Mode Specifications
INVERTER MODEL	SPF 3500 ES	SPF 5000 ES
Rated Output Power	3.5KVA/3.5KW	5KVA/5KW
Output Voltage Waveform	Pure Sine Wave
Output Voltage Regulation	230Vac±5%
Output Frequency	50Hz
Peak Efficiency	93>%
Overload Protection	5s@≥150% load; 10s@110%~150% load
Surge Capacity	2* rated power for 5 seconds
Nominal DC Input Voltage	48Vdc
Cold Start Voltage(Lead-Acid Mode)	46.0Vdc
Cold Start SOC(Li Mode)	Default 30%, Low DC Cut-off SOC +10%
Low DC Warning Voltage (Lead-Acid Mode)	44.0Vdc @ load < 20%
	42.8Vdc @ 20% ≤ load < 50%
	40.4Vdc @ load ≥ 50%
Low DC Warning Return Voltage (Lead-Acid Mode)	46.0Vdc @ load < 20%
	44.8Vdc @ 20% ≤ load < 50%
	42.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Lead-Acid Mode)	42.0Vdc @ load < 20%
	40.8Vdc @ 20% ≤ load < 50%
	38.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Li Mode)	42.0Vdc
Low DC Warning SOC (Li Mode)	Low DC Cut-off SOC +5%
Low DC Warning Return SOC (Li Mode)	Low DC Cut-off SOC +10%
Low DC Cut-off SOC(Li Mode)	Default 20%, 5%~30% settable
High DC Recovery Voltage	56.4Vdc(C.V. charging voltage)
High DC Cut-off Voltage	60.8Vdc
No Load Power Consumption	<60W
Table 3 Charge Mode Specifications
Utility Charging Mode
INVERTER MODEL	SPF 3500 ES	SPF 5000 ES
Charging Algorithm	3-Step
Max. AC Charging Current	60Amp(@VI/P=230Vac)	80Amp(@VI/P=230Vac)
Bulk Charging Voltage Flooded Battery	58.4Vdc
AGM / Gel Battery	56.4Vdc
Floating Charging Voltage	54Vdc
MPPT Solar Charging Mode
Max. PV Array Power	4500W	6000W
Max. PV Input Current	18A
Start-up Voltage	150Vdc±10Vdc
PV Array MPPT Voltage Range	120Vdc~430Vdc
Max. PV Array Open Circuit Voltage	450Vdc
Max. PV Charging Current	80A	100A
Max. Charging Current (AC Charger Plus Solar Charger)	80A	100A
Table 4 General Specifications
INVERTER MODEL	SPF 3500 ES	SPF 5000 ES
Safety Certification	CE
Operating Temperature Range	0℃ to 55℃
Storage temperature	-15℃~ 60℃
Humidity	5% to 95% Relative Humidity (Non-condensing)
Altitude	<2000m
Dimension(DWH), mm	485 x 330 x 135
Net Weight, kg	11.5	12

Growatt SPF 5000 ES User Manual (Growatt_SPF_5000_ES_User_Manual.pdf, 5,013 Kb) [Download]

Question:	so this inverter will not work in the USA
Answer:	Some Household appliances need 220VAC power, This inverter output is 220VAC, if you have such needed, you can purchase this inverter.
Question:	is this european 220-240 or is this north america split phase 110-220
Answer:	YES. This inverter‘s output is 220VAC you can use in Europe.
Question:	Soporta baterías de GEL?
Answer:	yes
Question:	Is it possible to charge my batteries using the 220VAC for the input and use 120v for the output at the same time to power my outlets?
Answer:	NOT. Inverer is OK to charge my batteries using the input 220VAC. But can't output 120VAC. This is 220V inverter, its output is 220V.
Question:	will this inverter feed back to the grid
Answer:	NO. This inverter is Off-grid inverter, it can work with or without battery. IF you need feed back to the grid, you need a Grid Tie Inverter,not this model.
Question:	Does this unit work with lithium batteries?
Answer:	yes.
Question:	Not sure i understood the 220vac answer.i'm in the us, can i have electrician install 220vac outlet next to my dryer 220v and have this inverter work?
Answer:	About 220vac‘s Explanation， 1. This inverter output is 220V AC. ------If your dryer need 220VAC power, then you can use inverter's output power directly to your dryer or other Electrical appliances which require 220V AC power. 2. If you have 48V battery, Usually you can use solar panels to charge battery and Storing energy, but if your solar panel is not avaliable, then you also can use 220V AC power to charge your battery, Storing energy for daily use.(this inverter can work with or without battery, if you don't have battery, is also ok.) 3. YES. You can use 220V AC power let this inverter work.
Question:	side label indicates 50/60hz is this configurable in the settings? what is the Inverter weight?
Answer:	yes. 50/60hz can be set by yourself. Include its package weight 32.18lb(14.6kg), item's Net Weight is 26.45lb(12kg). Dimension(DWH), mm: 485 x 330 x 135
Question:	do I need to buy separate solar panels?
Answer:	YES. IF your wanna use solar panel to power your load or charge your battery.
Question:	Does it shut off when overloaded or does it switch to utility power?
Answer:	This can be set, it depends on your need. Setting[18:Overload enable bypass] choose enabled; When this setting choose "enabled", if an overload occurs in battery mode, the inverter will switch to utility power your load.

5 out of 5

Reviews: 1

5 stars

100%

4 stars

0%

3 stars

0%

2 stars

0%

1 star

0%

Jürgen Jockenhöfer

Germany

05/04/2022, 10:42

Comment

Hello,
my question, what happens in case of too high load on the output (more than 5000W) of the inverter. Does it reduce the voltage or does it switches off the output. Thank you
another question, is it possible to switch off two of the three phases sometimes, to save standby energie

Administrator reply

Hello, our service will contact u soon.

Growatt 15KW 220Vac/380Vac three phase Solar All In One Inverter 48V 100A MPPT Charger Controller SPF 5000 ES*3