Growatt 15KW 220Vac/380Vac three phase Solar All In One Inverter 48V 100A MPPT Charger Controller SPF 5000 ES*3

Write a review
Ask a question
SPF 5000 ES*3
In stock
BrandGrowatt Lithium Battery Activation Active Lithium Batteries Battery Voltage48V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries, User Mode Inverter TypeHigh frequency Inverters Load workout with Battery Parallel Function PhaseSingle Phase, Three Phase, Parallel Single for Three Phase AC output230Vac±5% Rated Load Power5000W Max Panel Input Volt450V-500V PV Terminal Charging Modebuild-in PWM Solar Charge Controller Max Solar Panel Input Power6000W AC Charging Current80 Amps PV Charging Current100amps AC+PV Charging Current100Amps Wifi/Bluetooth ModuleWifi Module(Optional) WarehouseAUS Warehouse, USA Warehouse
Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 


    3pcs Growatt 5000W All In One Solar Inverter Charger With MPPT 100A Solar Controller Battery Regulator DC 48V System  Output AC 220Vac/380Vac three-phase Max Input PV 450V Parallel 6 Unit

    The second generation of Growatt SPF 5000TL HVM-WPV-P

    Product description

    Size:ES-5KW 48V inverter


    This is a multifunctional off-grid solar inverter, integrated with an MPPT solar charge controller, 
    a high-frequency pure sine wave inverter, and a UPS function module in one machine, 
    which is perfect for off-grid backup power and self-consumption applications. This inverter can work with or without batteries.


    • Rated power 3.5KW to 5KW, power factor 1
    • MPPT ranges 120V~430V, 450Voc
    • High-frequency inverter with small size and lightweight
    • Pure sine wave AC output
    • Solar and utility grid can power loads at the same time
    • With CAN/RS485 for BMS communication
    • With the ability to work without a battery
    • Parallel operation up to 6 units (only with the battery connected)
    • WIFI/ GPRS remote monitoring (optional)
    • Rated Output Power: 5KVA/5KW all in one inverter
    • Output Voltage Waveform: Pure Sine Wave
    • Output Voltage Regulation: 230Vac±5%
    • Output Frequency: 50Hz
    • Peak Efficiency: 93%
    • Overload Protection: 5s when ≥150% load; 10s when 110%~150% load
    • Surge Capacity: 2* rated power for 5 seconds
    • Nominal DC Input Voltage: 48Vdc
    • Cold Start Voltage(Lead-Acid Mode): 46.0Vdc
    • Cold Start SOC(Li Mode): Default 30%, Low DC Cut-off SOC +10%
    • Low DC Warning Voltage (Lead-Acid Mode: 44.0Vdc when load<20%,42.8Vdc when 20% ≤ load <50% 40.4Vdc when load ≥ 50%br> Notice: This inverter can work without a battery, it can work with solar panels/AC power only-no battery.
    ES 5000

    WARNING! Be sure that all inverters will share the same battery bank. Otherwise, the inverters will transfer to fault mode.



    Utility Charging Mode

    • Charging Algorithm3-Step
    • Max. AC Charging Current: 80Amp
    • Floating Charging Voltage: 54Vdc
    • Safety Certification: CE
    • Operating Temperature Range: 0℃ to 55℃
    • Storage temperature:-15℃~ 60℃
    • Dimension(D*W*H) : 485 x 330 x 135 mm
    • Net Weight: 12kg


    • The 5000W ES unit x 3
    • User manual x 3
    • Communication cable x 3
    • Software CD x 3
    • Current sharing cable x 3
    • Parallel communication cable x 3

    Nominal DC Input Voltage:  48Vdc

    Surge Capacity: 2* rated power for 5 seconds


    MPPT Solar Charging Mode

    • Max. PV Array Power: 6000W
    • Max. PV Input Current: 18A(PV to the inverter)
    • Start-up Voltage: 150Vdc±10Vdc
    • Max. PV Array Open Circuit Voltage: 450Vdc
    • Max. PV Charging Current: 100A (inverter to the battery)
    • Max. Charging Current (AC Charger Plus Solar Charger): 100A


    • Do not mount the inverter on flammable construction materials.
    • The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
    • Requested to install a separate DC over-current protector or disconnect device between battery and inverter.
    • All wiring must be performed by a qualified person.
    • It's very important for system safety and efficient operation to use the appropriate cable for battery connection. To reduce the risk of injury, please use the 2AWG cable. Max torque of 2Nm
    • (Single phase 220V AC /A Hot Leg Output, NOT Support 110V !!! )

    Table 1 Line Mode Specifications
    Input Voltage WaveformSinusoidal (utility or generator)
    Nominal Input Voltage230Vac
    Low Loss Voltage170Vac±7V (UPS); 90Vac±7V (Appliances)
    Low Loss Return Voltage180Vac±7V (UPS); 100Vac±7V (Appliances)
    High Loss Voltage280Vac±7V
    High Loss Return Voltage270Vac±7V
    Max AC Input Voltage300Vac
    Nominal Input Frequency50Hz / 60Hz (Auto-detection)
    Low Loss Frequency40±1Hz
    Low Loss Return Frequency42±1Hz
    High Loss Frequency65±1Hz
    High Loss Return Frequency63±1Hz
    Output Short Circuit ProtectionCircuit Breaker
    Efficiency (Line Mode)>95% ( Rated R load, battery full charged )
    Transfer Time10ms typical, 20ms Max@ Single <30ms @ Parallel
    Table 2 Inverter Mode Specifications
    Rated Output Power3.5KVA/3.5KW5KVA/5KW
    Output Voltage WaveformPure Sine Wave
    Output Voltage Regulation230Vac±5%
    Output Frequency50Hz
    Peak Efficiency93>%
    Overload Protection5s@≥150% load; 10s@110%~150% load
    Surge Capacity2* rated power for 5 seconds
    Nominal DC Input Voltage48Vdc
    Cold Start Voltage(Lead-Acid Mode)46.0Vdc
    Cold Start SOC(Li Mode)Default 30%, Low DC Cut-off SOC +10%
    Low DC Warning Voltage (Lead-Acid Mode)44.0Vdc @ load < 20%
    42.8Vdc @ 20% ≤ load < 50%
    40.4Vdc @ load ≥ 50%
    Low DC Warning Return Voltage (Lead-Acid Mode)46.0Vdc @ load < 20%
    44.8Vdc @ 20% ≤ load < 50%
    42.4Vdc @ load ≥ 50%
    Low DC Cut-off Voltage (Lead-Acid Mode)42.0Vdc @ load < 20%
    40.8Vdc @ 20% ≤ load < 50%
    38.4Vdc @ load ≥ 50%
    Low DC Cut-off Voltage (Li Mode)42.0Vdc
    Low DC Warning SOC (Li Mode)Low DC Cut-off SOC +5%
    Low DC Warning Return SOC (Li Mode)Low DC Cut-off SOC +10%
    Low DC Cut-off SOC(Li Mode)Default 20%, 5%~30% settable
    High DC Recovery Voltage56.4Vdc(C.V. charging voltage)
    High DC Cut-off Voltage60.8Vdc
    No Load Power Consumption<60W
    Table 3 Charge Mode Specifications
    Utility Charging Mode
    Charging Algorithm3-Step
    Max. AC Charging Current60Amp(@VI/P=230Vac)80Amp(@VI/P=230Vac)
    Bulk Charging Voltage                                    Flooded Battery58.4Vdc
    AGM / Gel Battery56.4Vdc
    Floating Charging Voltage54Vdc
    MPPT Solar Charging Mode
    Max. PV Array Power4500W6000W
    Max. PV Input Current18A
    Start-up Voltage150Vdc±10Vdc
    PV Array MPPT Voltage Range120Vdc~430Vdc
    Max. PV Array Open Circuit Voltage450Vdc
    Max. PV Charging Current80A100A
    Max. Charging Current (AC Charger Plus Solar Charger)80A100A
    Table 4 General Specifications
    Safety CertificationCE
    Operating Temperature Range0 to 55
    Storage temperature-15~ 60
    Humidity5% to 95% Relative Humidity (Non-condensing)
    Dimension(D*W*H), mm485 x 330 x 135
    Net Weight, kg11.512

    Growatt SPF 5000 ES User Manual (Growatt_SPF_5000_ES_User_Manual.pdf, 5,013 Kb) [Download]

    Brand information
    Brand :
    Battery Information for inverters and controllers
    Lithium Battery Activation :
    • Active Lithium Batteries
    Battery Voltage :
    • 48V
    Battery Type :
    • Lifepo4 Batteries
    • Lithium Batteries
    • Flooded Batteries
    • Gel Batteries
    • Lead-acid Batteries
    • AGM Batteries
    • User Mode
    Inverter Information
    Inverter Type:
    • High frequency Inverters
    Load workout with Battery:
    Parallel Function:
    • Single Phase
    • Three Phase
    • Parallel Single for Three Phase
    Split Phase:
    AC output:
    • 230Vac±5%
    Rated Load Power:
    • 5000W
    Solar Panel Information for inverters
    Max Panel Input Volt :
    • 450V-500V
    PV Terminal Charging Mode:
    • build-in PWM Solar Charge Controller
    Max Solar Panel Input Power:
    • 6000W
    Charging Current Information for inverters
    AC Charging Current:
    • 80 Amps
    PV Charging Current:
    • 100amps
    AC+PV Charging Current:
    • 100Amps
    Accessories information for inverters
    Wifi/Bluetooth Module:
    • Wifi Module(Optional)
    Other Information
    • AUS Warehouse
    • USA Warehouse
    Find similar
    Question: so this inverter will not work in the USA
    Answer: Some Household appliances need 220VAC power, This inverter output is 220VAC, if you have such needed, you can purchase this inverter.
    Question: is this european 220-240 or is this north america split phase 110-220
    Answer: YES. This inverter‘s output is 220VAC you can use in Europe.
    Question: Soporta baterías de GEL?
    Answer: yes
    Question: Is it possible to charge my batteries using the 220VAC for the input and use 120v for the output at the same time to power my outlets?
    Answer: NOT. Inverer is OK to charge my batteries using the input 220VAC. But can't output 120VAC. This is 220V inverter, its output is 220V.
    Question: will this inverter feed back to the grid
    Answer: NO. This inverter is Off-grid inverter, it can work with or without battery. IF you need feed back to the grid, you need a Grid Tie Inverter,not this model.
    Question: Does this unit work with lithium batteries?
    Answer: yes.
    Question: Not sure i understood the 220vac answer.i'm in the us, can i have electrician install 220vac outlet next to my dryer 220v and have this inverter work?
    Answer: About 220vac‘s Explanation, 1. This inverter output is 220V AC. ------If your dryer need 220VAC power, then you can use inverter's output power directly to your dryer or other Electrical appliances which require 220V AC power. 2. If you have 48V battery, Usually you can use solar panels to charge battery and Storing energy, but if your solar panel is not avaliable, then you also can use 220V AC power to charge your battery, Storing energy for daily use.(this inverter can work with or without battery, if you don't have battery, is also ok.) 3. YES. You can use 220V AC power let this inverter work. 
    Question: side label indicates 50/60hz is this configurable in the settings? what is the Inverter weight?
    Answer: yes. 50/60hz can be set by yourself. Include its package weight 32.18lb(14.6kg), item's Net Weight is 26.45lb(12kg). Dimension(D*W*H), mm: 485 x 330 x 135
    Question: do I need to buy separate solar panels?
    Answer: YES. IF your wanna use solar panel to power your load or charge your battery.
    Question: Does it shut off when overloaded or does it switch to utility power?
    Answer: This can be set, it depends on your need. Setting[18:Overload enable bypass] choose enabled; When this setting choose "enabled", if an overload occurs in battery mode, the inverter will switch to utility power your load.

    5 out of 5
    Reviews: 1
    5 stars
    4 stars
    3 stars
    2 stars
    1 star
    Jürgen Jockenhöfer
    my question, what happens in case of too high load on the output (more than 5000W) of the inverter. Does it reduce the voltage or does it switches off the output. Thank you
    another question, is it possible to switch off two of the three phases sometimes, to save standby energie
    Administrator reply
    Hello, our service will contact u soon.
    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase