Growatt 100A 10.5KW All In One Inverter 48V Build-in 100Amps MPPT Charger Controller 220Vac three Phase 380Vac SPF 3500 ES*3

Write a review
Ask a question
SPF 3500 ES*3
In stock
BrandGrowatt Lithium Battery Activation Active Lithium Batteries Battery Voltage48V Battery TypeLifepo4 Batteries, Lithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries Inverter TypeHigh frequency Inverters Load workout with Battery Parallel Function PhaseSingle Phase, Three Phase, Parallel Single for Three Phase AC output230Vac±5%, 380Vac Rated Load Power3500W Max Panel Input Volt450V-500V PV Terminal Charging Modebuild-in MPPT Solar Charge Controller Max Solar Panel Input Power4500W AC Charging Current60 Amps PV Charging Current80amps AC+PV Charging Current80Amps Wifi/Bluetooth ModuleWifi Module(Optional) WarehouseUSA Warehouse, AUS Warehouse
$2,39600
$2,27620
You save: $119.80
+
Why PowMr?
  • — Fast Delivery
  • — Free Shipping 
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
Wholesale

growatt inverter

3PCS Growatt 3500W Solar Inverter Charger With MPPT 100A Solar Controller Battery Regulator DC 48V System Output AC 220V Max Input PV 450V Parallel 6 Unit Suitable lifepo4  Work with or Without Battery

Product description

Size:3.5KW-ES 48 Volt Inverter
Overview
This is a multifunctional off-grid solar inverter, integrated with an MPPT solar charge controller, a high-frequency pure sine wave inverter, and a UPS function module in one machine, which is perfect for off-grid backup power and self-consumption applications. This all in one inverter can work with or without batteries.

Features

  • Rated power 3.5KW to 5KW, power factor 1
  • MPPT ranges 120V~430V, 450Voc
  • High-frequency inverter with small size and lightweight
  • Pure sine wave AC output
  • Solar and utility grid can power loads at the same time
  • With CAN/RS485 for BMS communication
  • With the ability to work without a battery
  • Parallel operation up to 6 units (only with the battery connected)
  • WIFI/ GPRS remote monitoring (optional)

Growatt 3500ES Specifications

Nominal Input Voltage230Vac(Max AC Input Voltage:300Vac)
Nominal Input Frequency50Hz / 60Hz (Auto-detection)
Rated Output Power3.5KVA/3.5KW Pure Sine Wave
Output Voltage Regulation230Vac±5>%
Output Frequency50Hz
Surge Capacity2* rated power for 5 seconds
Nominal DC Input Voltage48Vdc
Max. PV Array Power4500W
Max. PV Input Current18A
Start-up Voltage150Vdc±10Vdc
PV Array MPPT Voltage Range120Vdc~430Vdc
Max. PV Open Circuit Voltage450Vdc
Max. PV Charging Current80A
Max. AC Charging Current60Amp(@VI/P=230Vac)
Operating Temperature Range0℃ to 55℃(131 °F)

 Output source working mode(To configure load power source priority)

  • Solar First: Solar energy provides power to the loads as first priority; battery energy will supply power to the loads at the same time If solar energy is not sufficient. 
  • The utility provides power to the loads only when Solar energy is not available or the battery voltage drops to a low-level warning Voltage.
  • Utility First (default): Utility will provide power to the loads as first priority. Solar and battery energy will provide power to the loads only when utility power is not available.
  • SBU Priority: Solar energy provides power to the loads as first priority, then battery, then Utility power.
  • SUB Priority: Solar energy provides power to the loads as first priority, then utility power, then Battery power.

Growatt inverter

 Charger source priority: To configure charger source priority

  • Solar first: Solar energy will charge the battery as first priority, then Utility Power.
  • Solar and Utility: Solar energy and utility will both charge the battery.
  • Only Solar: Solar energy will be the only charger source no matter utility is available or not.
  • If this off-grid solar inverter is working in Battery mode or Power saving mode, only solar energy can charge the battery. Solar energy will charge the battery if it's available and sufficient. 

Growatt inverter

Growatt inverter

IMPORTANT WIRING NOTE:

  1. Install screws recommend M4 or M5 size screws.
  2. Make sure the polarity at both the battery and the inverter/charge is correct.
  3. connected and ring terminals are tightly screwed to the terminals.
  4. Before making the final DC connection or closing DC breaker/disconnector, be sure positive (+) must be connected to positive (+) and negative (-) must be connected to the negative(-).
  5. AC Input/Output recommended cable size: 10 AWG; PV recommended cable size: 12 AWG/1.2-1.6 Nm Torque value; Battery recommended cable: 4 AWG/2-3 Nm Torque value
  6. Parallel operation up to 6 units (only with the battery connected)


Please read the specification carefully before install

Specifications
Table 1 Line Mode Specifications
INVERTER MODELSPF 3500 ESSPF 5000 ES
Input Voltage WaveformSinusoidal (utility or generator)
Nominal Input Voltage230Vac
Low Loss Voltage170Vac±7V (UPS); 90Vac±7V (Appliances)
Low Loss Return Voltage180Vac±7V (UPS); 100Vac±7V (Appliances)
High Loss Voltage280Vac±7V
High Loss Return Voltage270Vac±7V
Max AC Input Voltage300Vac
Nominal Input Frequency50Hz / 60Hz (Auto-detection)
Low Loss Frequency40±1Hz
Low Loss Return Frequency42±1Hz
High Loss Frequency65±1Hz
High Loss Return Frequency63±1Hz
Output Short Circuit ProtectionCircuit Breaker
Efficiency (Line Mode)>95% ( Rated R load, battery full charged )
Transfer Time10ms typical, 20ms Max@ Single <30ms @ Parallel
Table 2 Inverter Mode Specifications
INVERTER MODELSPF 3500 ESSPF 5000 ES
Rated Output Power3.5KVA/3.5KW5KVA/5KW
Output Voltage WaveformPure Sine Wave
Output Voltage Regulation230Vac±5%
Output Frequency50Hz
Peak Efficiency93>%
Overload Protection5s@≥150% load; 10s@110%~150% load
Surge Capacity2* rated power for 5 seconds
Nominal DC Input Voltage48Vdc
Cold Start Voltage(Lead-Acid Mode)46.0Vdc
Cold Start SOC(Li Mode)Default 30%, Low DC Cut-off SOC +10%
Low DC Warning Voltage (Lead-Acid Mode)44.0Vdc @ load < 20%
42.8Vdc @ 20% ≤ load < 50%
40.4Vdc @ load ≥ 50%
Low DC Warning Return Voltage (Lead-Acid Mode)46.0Vdc @ load < 20%
44.8Vdc @ 20% ≤ load < 50%
42.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Lead-Acid Mode)42.0Vdc @ load < 20%
40.8Vdc @ 20% ≤ load < 50%
38.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Li Mode)42.0Vdc
Low DC Warning SOC (Li Mode)Low DC Cut-off SOC +5%
Low DC Warning Return SOC (Li Mode)Low DC Cut-off SOC +10%
Low DC Cut-off SOC(Li Mode)Default 20%, 5%~30% settable
High DC Recovery Voltage56.4Vdc(C.V. charging voltage)
High DC Cut-off Voltage60.8Vdc
No Load Power Consumption<60W
Table 3 Charge Mode Specifications
Utility Charging Mode
INVERTER MODELSPF 3500 ESSPF 5000 ES
Charging Algorithm3-Step
Max. AC Charging Current60Amp(@VI/P=230Vac)80Amp(@VI/P=230Vac)
Bulk Charging Voltage                                    Flooded Battery58.4Vdc
AGM / Gel Battery56.4Vdc
Floating Charging Voltage54Vdc
MPPT Solar Charging Mode
Max. PV Array Power4500W6000W
Max. PV Input Current18A
Start-up Voltage150Vdc±10Vdc
PV Array MPPT Voltage Range120Vdc~430Vdc
Max. PV Array Open Circuit Voltage450Vdc
Max. PV Charging Current80A100A
Max. Charging Current (AC Charger Plus Solar Charger)80A100A
Table 4 General Specifications
INVERTER MODELSPF 3500 ESSPF 5000 ES
Safety CertificationCE
Operating Temperature Range0 to 55
Storage temperature-15~ 60
Humidity5% to 95% Relative Humidity (Non-condensing)
Altitude<2000m
Dimension(D*W*H), mm485 x 330 x 135
Net Weight, kg11.512


Growatt SPF 3500 ES User Manual (Growatt_SPF_5000_ES_User_Manual.pdf, 5,013 Kb) [Download]

Brand information
Brand :
Growatt
Battery Information for inverters and controllers
Lithium Battery Activation :
  • Active Lithium Batteries
Battery Voltage :
  • 48V
Battery Type :
  • Lifepo4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • Gel Batteries
  • Lead-acid Batteries
  • AGM Batteries
Inverter Information
Inverter Type:
  • High frequency Inverters
Load workout with Battery:
Yes
Parallel Function:
Yes
Phase:
  • Single Phase
  • Three Phase
  • Parallel Single for Three Phase
Split Phase:
No
AC output:
  • 230Vac±5%
  • 380Vac
Rated Load Power:
  • 3500W
Solar Panel Information for inverters
Max Panel Input Volt :
  • 450V-500V
PV Terminal Charging Mode:
  • build-in MPPT Solar Charge Controller
Max Solar Panel Input Power:
  • 4500W
Charging Current Information for inverters
AC Charging Current:
  • 60 Amps
PV Charging Current:
  • 80amps
AC+PV Charging Current:
  • 80Amps
Accessories information for inverters
Wifi/Bluetooth Module:
  • Wifi Module(Optional)
Other Information
Warehouse:
  • AUS Warehouse
  • USA Warehouse
Find similar
Q Can this run my washer and dryer
A Because washing machines and dryers are inductive loads, the instantaneous power of starting is as high as 6-7 times. Therefore, we need you to provide the nameplate information of the washing machine and dryer, so that we can judge whether the solar inverter can drive your washing machine and dryer.
Q If I connct six inverters in series, what is the smallest AH of batteries that should be connected?
A It cannot be connected in series, only can be connected in parallel to the same battery pack.
Q Whats the best transformer to combo with this to obtain 120v a/c output if needed?
A Could you consider this inverse


5 out of 5
Reviews: 1
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 star
0%
Polly White
Germany
Comment
so can i order here for germany or where should i order?
and what is the price if i want to order like this package Growatt 100A 10.5KW All In One Inverter Build-in 100Amps MPPT Charger Controller 220Vac three Phase 380Vac SPF 3500 ES*3
2 or 3 times
Administrator reply
Our service will contact u soon.
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We only offer quality goods with higher cost performance

Returns within 30 days

You have 30 days to test your purchase