EPEVER All In One Solar Inverter Charger 3000W DC 24V AC 220V UP3000-HM10022
UPower-Hi SeriesInverter/Charger
Overview
UPower-Hi series is an all in one inverter charger that supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This all in one inverter charger can raise the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Features
- Supports the battery mode or non-battery mode.
- Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously.
- Surge and reverse connection protections to support the lithium battery system perfectly.
- Three charging modes: Solar only, Solar priority, Utility & Solar.
- Two AC output modes: Utility priority and Inverter priority.
- High tracking efficiency of MPPT no less than 99.5%.
- PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage.
- Advanced SPWM technology and pure sine wave output.
- Customized charging current and discharging limited current.
- SOC with the self-learning feature is visible on LCD.
- 4.2 inch LCD to monitor and modify system parameters.
- Optional WiFi or GPRS Remote control by the RS485 isolated communication port.
- Optional BMS-Link port, which takes the charging and discharging control from BMS.
Specifications | ||
Item | UP3000-HM10022 | UP5000-HM8042 |
Rated battery voltage | 24VDC | 48VDC |
Battery input voltage | 21.6~32VDC | 43.2~64VDC |
Max. battery charging current | 100A | 80A |
Inverter output | ||
Continuous output power | 3000W@30℃ | 5000W@30℃ |
Max. surge power | 6000W | 8000W |
Output voltage range | 220VAC(-6%~+3%),230VAC(-10%~+3%) | |
Output frequency | 50/60±0.2% | |
Output wave | Pure Sine Wave | |
Load power factor | 0.2-1(VA ≤ continuous output power) | |
Distortion THD | THD≤3%(Resistive load) | |
80% rated output efficiency | 92% | |
Max. Rated output efficiency | 91% | |
Max. output efficiency | 93% | |
Switch time | 10ms(Switch from the utility output to the inverter output) 15ms(Switch from the inverter output to the utility output) | |
Utility charging | ||
Utility input voltage | 176VAC~264VAC(Default) 90VAC~280VAC(Programmable) | |
Utility input frequency | 40~65Hz | |
Max. utility charge current | 80A | 60A |
Solar charging | ||
Max. PV open circuit voltage | 450V(At minimum temperature) 395V(25℃) | 500V(At minimum temperature) 440V(25℃) |
MPPT voltage range | 80~350V | 120~400V |
Max. PV input power | 4000W | |
(Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter 3.4 Operating mode for details.) | ||
Max. PV charging power | 2875W | 4000W |
Max. PV charging current | 100A | 80A |
Equalize charging voltage | 29.2V(AGM default) | 58.4V(AGM default) |
Boost charging voltage | 28.8V(AGM default) | 57.6V(AGM default) |
Float charging voltage | 27.6V(AGM default) | 55.2V(AGM default) |
Low voltage disconnect voltage | 21.6V(AGM default) | 43.2V(AGM default) |
Tracking efficiency | ≥99.5% | |
Temp. compensate coefficient | -3mV/℃/2V(Default) | |
General | ||
Surge current | 60A | 95A |
Zero load consumption | <1.8A | <1.2A |
(without PV and utility connection, turn on the load output) | ||
Standby current | <1.2A | <0.7A |
(without PV and utility connection, turn off the load output) | ||
Mechanical Parameters | ||
Dimension(H x W x D) | 642.5x381.6x149mm | |
Mounting size | 620*300mm | |
Mounting hole size | Φ10mm | |
Net Weight | 19kg | |
Enclosure | IP30 | |
Relative humidity | < 95% (N.C.) | |
Working temperature | -20℃~50℃(When the working temperature reaches 30℃ or above, the | |
load power is reduced appropriately; full load working is not supported«) | ||
Storage temperature | -25℃~60℃ | |
Altitude | <5000m(If the altitude is more than 1000 meters, the rated power is reduced according to GB7260.) |
- No Lithium Batteries Activation
- 24V
- Lifepo4 Batteries
- Lithium Batteries
- Flooded Batteries
- Gel Batteries
- AGM Batteries
- User Mode
- High frequency Inverters
- Single Phase
- 230Vac±5%
- 3000W
- 450V-500V
- build-in MPPT Solar Charge Controller
- 2875
- 80 Amps
- 100amps
- 100Amps
- Wifi Module(Optional)