2000W Wind Grid Tie Inverter For Input 45-90V to output 230V AC Wind System Pure Sine Wave 3 Phase Wind Turbine

NEW 2000W Wind Power Grid Tie Inverter- for 3 Phase Wind Turbines

--Max Efficiency:>92% MPPT Efficiency:99%

--DC/AC 45V-90V

--AC 220V 230V 240V 50hz/60hz

Features :

1. Low cost and easy installation

2. Directly connect to a three-phase wind turbine

3. Much better output waveform compare with similar GTI

4. Improving the efficiency of the entire solar power system

Overload protection, Anti-island protection

Short-circuit protection/Reverse polarity protection

5. AC output voltage and current THD<5%, PF>99%

6. Build in the dump load function

Introduction of Sunshine Grid Tie Inverter for Wind Turbine

The small wind grid tie power inverter can obtain the wind energy from a wind turbine and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable.

The inverter can be connected to any outlet of the utility grid at the house. It monitors the volume, frequency, and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid's, and the volume is a bit higher than the grid's, then according to the current-controlled PWM, to control the output power to the grid.

The grid-tie inverter only outputs power when the home grid is on.

When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid-tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric apparatus that is used in the house is larger than the output power of the inverters, this power from the inverter will be consumed in the house, which will slow down the power meter, otherwise, the difference in the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid.



Technical Data



Max. Power Output


Input AC/DC Voltage Range

45V ~ 90V

AC Output Voltage Range


Output Frequency


Standby Power Consumption


Total Harmonic Distortion


Peak Inverter Efficiency


Power Factor


Output Wave Form

Pure Sine Wave

MPPT Efficiency


Over Current Protection


Over Temperature Protection


Reverse Polarity Protection


Anti-Island Protection




Weight ( Kg)


Dimensions (W x H x D)



(1) (2) Dump load resistor connection Terminal. These terminals will connect to the dump load resistor.

(3) AC socket, This socket will connect the inverter to the public grid via the AC cable.

(4) Cooling fans.

(5) Input Terminals. These terminals will connect to the wind turbine.

How to select a wind grid tie inverter?

1. Max output power of the wind turbine:

500w-1000w wind turbines , suggest 1000w inverter .

1000w-2000w wind turbines , suggest 2000w turbine .

2. Voltage range :

24v 36v 48v wind turbines , suggest 22-65v inverter.

48v 60v 72v 90V wind turbines ,suggest 45-90v inverter .

Some wind turbines have built-in a regulator, the output is DC, please choose a DC input type wind inverter.

How to use a grid-tie inverter with battery and wind turbine?

If the user wants to use a wind turbine to charge the battery first, and output excess power to the grid, we suggest the battery function grid-tie inverter(solar power GTI, battery function ) . the wind inverter can not work with the battery well.

What is the dump load controller/resistor?

The dump load controller/resistor is used to protect the wind turbine and inverter. if the wind speed is too fast, the voltage will be high, it will work to reduce the wind turbine running speed and voltage.


WAL model of grid-tie inverter connected with AC output type of wind turbine.


Connecting two 1000G2-WAL with a max. power is the 2KW wind turbine


The user manual of the wind power inverter

please contact us to download.


wind LCD 4in1_Fotor液晶显示5_Fotor_Fotor800


Optional part :

Wifi Port for MPPT 1000W/2000W NEW SUN Solar Grid Tie Inverter

RS485 connected

Web / Mobile Phone App on Line Monitoring

NOTE: this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together.

NOTE: It will be built-in side the inverter.

Product description :

wifi plug2 800

NOTE: this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together.

NOTE: It will be built-in side the inverter.

Web Model:


APP Model:


type  POW-30AH-12.8V POW-50AH-12.8V POW-100AH-12.8V
Nominal voltage 12.8V 12.8V 12.8v
Rated capacity 30Ah(0.2C/25)℃(Min:29Ah) 50Ah(0.2C/25)℃(Min:49Ah) 100Ah (0.2C/25°C) (Min:96Ah)
Operating voltage range 10V-14.6V(Typical:12.8V) 10V-14.6V(Typical:12.8V) 10V~14.6V (Typical:12.8V)
Charging voltage 14.6V 14.6V 14.6v
Dischange cut -off voltage  10V 10V 10v
Charging current(Max) 15A  25A  50A
Dischange current (Max) 30A 50A 100A
Length 195mm 228mm 325mm
Width 133mm 138mm 170mm
Height 171mm 210mm 215mm
Weight about 4.5kg about 6.2kg About 11.5kg
Shell Plastics/Black Plastics/Black Plastics/Black
Series Maximum support for 4 sets in series Maximum support for 4 sets in series Maximum support for 4 sets in series
Parallel support support Support
Alarm&potection Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc Over Voltage, Under Voltage, Over Current, Short Circuit etc.
Cooling mode  Automatic cold and hot  Automatic cold and hot  Automatic cold and hot
Terminal stud M6 M8 M8
Altitude ≤4000m ≤4000m <4000m
Recommended operating charge temperature  15℃-40℃ 15℃-40℃ 15%~85%
Recommended operating dischage temperature 15℃-40℃ 15℃-40℃ 0°C~50°C
Recommended operating storagetemperature -20℃-45℃ -20℃-45℃ -10°C~60°C
Humidity 15%-85% 15%-85% 15°C~40°C
Operating Charge temperature 0℃-50℃ 0℃-50℃ 15°C~40°C
-10Operating Dischage temperature -10℃-60℃ -10℃-60℃  -20°C~45°C

User Manual (Temank-Power-Inverter-JYP-1000W-12-11-manual.pdf, 18,553 Kb) [Download]

Inverter Information
Load workout with Battery:
Parallel Function:
Split Phase:
Find similar

No reviews found

In stock
Write a review
Ask a question
Why PowMr?
  • — Fast Delivery
  • — 24 months warranty 
  • — Avg. response time 1 Hrs. (Working  Day)
  • PowMr Everywhere 
    You May Also Like
    • Cyber Week Deals
    • Bestsellers
    Cyber Week Deals
    Fast and high quality delivery

    Our company makes delivery all over the world

    Quality assurance and service

    We only offer quality goods with higher cost performance

    Returns within 30 days

    You have 30 days to test your purchase