- Administrator reply
- Hello, our service will contact u soon.
PowMr All In One Solar Inverter Charger 5000W 48V PV 500V AC Output 100V 105V 110V DC 80A MPPT Solar Controller Compatibile With Lead Acid Battery And lifepo4 Battery
PowMr Solar Inverter Charger 5000VA 48V PV 500VDC 80A MPPT Compatible With Lead Acid Battery And Lithium Battery
General Information
Pow series is a new 5000 Watt Solar Generator, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability, and high industrial standard. Four charging modes are optional. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real-time.
Feature
- Brand: PowMr
- Product Model: POW-LVM5K-48V-H
- Full digital voltage and current double closed-loop control, advanced SPWM technology, the output of pure sine wave.
- Two output modes: mains bypass and inverter output; uninterrupted power supply
- Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging
- Advanced MPPT technology with an efficiency of 99.9%
- Designed with an LCD screen and 3 LED indicators for a dynamic display of system data and operating status
- Manual ON/OFF switch controlling AC output
- Power saving mode available to reduce the empty load loss
- Intelligent variable-speed fan to efficiently dissipate heat and extend system life
- Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery
- Complete protection, including short circuit protection, over-voltage, and under-voltage protection, overload protection, reverse protection, etc
Photovoltaic Modules (PV): convert light energy into DC power, charge the battery through the solar inverter charger, or directly reverse into alternating current to power the load
Power or generator (Utility): Access at the AC input can power the load and charge the battery. If you do not have a power supply or generator, the system can also operate normally, where the load is supplied by batteries and photovoltaic modules
Battery: The role of the battery is to ensure the normal use of electricity for the system load when the solar energy is insufficient and there is no electricity
Household load: Can be accessed to a variety of household and office loads, including refrigerators, lamps, televisions, fans, air conditioning, and other AC loads
Battery Charging Modes:
The solar all in one inverter will have 4 operational charging modes which change the logic as to how and when to charge the battery banks. The solar inverter has four charging modes: PV priority, Utility Priority, Hybrid Charging, and Only Solar Charging.
PV Priority
In PV Priority mode it will make full use of the solar input during the day in order to charge the battery bank. This effectively allows using the unit off-grid during peak utility times in order to cut costs on utility charging. Only when solar fails to start or is interrupted will the unit automatically switch to utility mode for backup.
5000 Watt Solar Generator Utility Priority
In Utility Priority mode, the detected AC input will be a priority for battery charging. If the power becomes unstable or unusable, then it will switch to PV charging.
Hybrid Charging
In Hybrid Charging, PV and Utility will work together to charge the battery bank at the same time. Priority will be given to PV and utilize MPPT charging. Upon PV charging being insufficient, the power supply replenishes with Utility power. This method is the fastest to charge and suitable for unstable areas of the grid, ready to provide an adequate backup power supply.
Only Solar Charging
Only solar charging is the most energy-efficient way to charge your battery bank and does not make use of AC input. The utility will not charge the battery, even if it is available.
Load Output Working Modes
The solar inverter has 3 working modes that dictate how the incoming power is used to power the loads. Users may configure the output source priority to configure load power.
5000 Watt Solar Generator PV Priority
In this mode, only the incoming solar energy and battery power are used to power the loads. This can maximize the use of green energy when selecting PV priority in Battery Charging Mode to achieve overall energy conservation and emission reduction. Upon there being no more usable solar energy or the battery voltage drops to a low voltage setpoint, then the unit will switch to utility power to continue to power up the loads. It is recommended to be in this mode for relatively stable areas.
Utility Priority
Equivalent to a backup UPS for use in unstable areas of the grid, Utility will provide power to the loads as a priority. Solar and battery energy will provide power to the loads only when utility power is not available.
Inverter Mode
The Battery energy will supply power to the loads. The utility provides power to the loads only when battery voltage drops too a low voltage which maximizes the use of DC power.
Product Overview

- LCD Buttons
- Mounting Holes
- LCD Screen
- LED Indicators
- AC Input Breaker
- Dry Contact Port
- RS485 Communication Port
- USB Debugging Port (Internal Use)
- AC Input Terminal
- AC Output Terminal
- Cooling Fans
- PV Input Terminal
- Main On/Off Power Switch
- Battery Input Terminal
- Grounding Lug
Please download the product manual to get more information about the product.
Technical Specifications
Model |
POW-LVM5.0K-48V-H |
Utility/Grid |
|
Rated input Voltage |
110/120Vac |
Input voltage range |
(90Vac~140Vac) ±2% |
Frequency |
50Hz/ 60Hz (auto detect) |
Frequency range |
47±0.3Hz ~ 55±0.3Hz (50Hz); |
Overload / Short circuit Protection |
Breaker |
Efficiency |
>95% |
Conversion time (Bypass and reverse) |
10ms |
Reverse Flow Protection |
Yes |
Max Bypass Current load |
63A |
Inverter |
|
Waveform |
Pure Sine Wave |
Rated Output (VA) |
5000(4100/4300/4500) |
Rated Output (W) |
5000(4100/4300/4500) |
Power factor |
1 |
Output AC Voltage |
120Vac(100/105/110Vac Settable) |
Unstable Input Error |
±5% |
Output Frequency (Hz) |
50Hz ±0.3Hz 60Hz ± 0.3Hz |
Efficiency |
>90% |
Overload protection |
(102%<load<110%) ±10%: reporting error and turn off the output after 5 minutes; |
Peak power |
7000VA |
Motor Capability |
3HP |
Output Short-circuit Protection |
Breaker |
Bypass Breaker Specifications |
63A |
Rated Battery Voltage |
48V (minimum start-up voltage 44V) |
Battery voltage range |
40.0Vdc~60Vdc ± 0.6Vdc |
Power Saving Mode Self-Consumption |
≤50W |
Model |
POW-LVM5.0K-48V-H |
Utility/Grid Charging |
|
Battery type |
Lead Acid or Lithium |
Maximum Charging Current (AC) |
40A |
Unstable Condition Error |
± 5Adc |
Charging Voltage Range |
40 –60Vdc |
Short-circuit protection |
Breakers and blown fuses |
Circuit Breaker Specifications |
63A |
Overcharge Protection |
Yes; Automatically alerts and then turns off charging after1 minute |
Solar (PV) Charging |
|
Recommended PV Max |
500Vdc |
PV Operating Voltage |
120-500Vdc |
MPPT Voltage Range |
120-450Vdc |
Battery Charging Range |
40-60Vdc |
Maximum Input Power |
5000W |
Maximum Input Current |
80A |
Maximum Output Power |
5000W |
PV Charging Current Range |
0-80A |
Short-circuit Protection |
Internal Fuse |
Wiring Protection |
Reverse Polarity |
General |
|
Certifications |
CE(IEC62109), RoHS, EN61000 |
Operating Temperature |
5°F ~ 131°F/ -15°C ~ 55°C |
Storage Temperature |
-13°F ~ 140°F / -25°C ~ 60°C |
Humidity |
5% to 95% (three-layer paint protection) |
Noise |
≤60dB |
Cooling |
Fans, Forced cooling with adjustable air speed |
IP Grade |
IP 20 |
Safety Class |
I |
Dimensions (L-W-D) |
16.8*12.7*4.9 in / 426*322*124 mm |
Weight |
25.6 lbs /11.6kg |
Non-Lithium Battery Parameters
Battery type Parameters |
Sealed lead acid battery (SLD) |
Colloidal lead acid battery (GEL) |
Vented lead acid battery (FLD) |
User-defined (USE) |
Overvoltage disconnection voltage |
60V |
60V |
60V |
60V |
Equalizing charge voltage |
58.4V |
56.8V |
59.2V |
40~60V |
Boost charge voltage |
57.6V |
56.8V |
58.4V |
40~60V |
Floating charge voltage |
55.2V |
55.2V |
55.2V |
40~60V |
Undervoltage alarm voltage |
44V |
44V |
44V |
40~60V |
Low voltage |
42V |
42V |
42V |
40~60V |
Discharge limit voltage |
40V |
40V |
40V |
40~60V |
Over-discharge delay time |
5S |
5S |
5S |
1~30S |
Equalizing charge duration |
120 minutes |
- |
120 minutes |
0~600 minutes |
Equalizing charge interval |
30 days |
- |
30 days |
0~250 days |
Boost charge duration |
120 minutes |
120 minutes |
120 minutes |
10~600 minutes |
- Active Lithium Batteries
- 48V
- Lifepo4 Batteries
- Lithium Batteries
- Flooded Batteries
- Gel Batteries
- Lead-acid Batteries
- AGM Batteries
- User Mode
- High frequency Inverters
- Single Phase
- 120Vac(100/105/110Vac Settable) ±5%
- 5000W
- 450V-500V
- build-in MPPT Solar Charge Controller
- 5000W
- 40 Amps
- 80amps
- 80Amps
- Wifi Module(Optional)
- USA Warehouse
Question: | Where/how do you wire the ground for the AC out? |
Answer: | Please check User manual Page 14, there is Ground wiring Icon |
Question: | Where/how do you wire the ground for the AC out? |
Answer: | Please check User manual Page 14, there is Ground wiring Icon |
Question: | can i use 2 of this inverter to make split phase 110v / 220v |
Answer: | NO |
Question: | Compatible with Lifepo4 battery bank? |
Answer: | yes. It is ok |
Question: | Can two 5k inverters be connected parallel to achieve 10k on both input and output? |
Answer: | NO. This inverter doesn't support two or more parallel |
Question: | is there a plan for a firm upgrade for multiple units to be run in parallel? and/ or have units operate in 120/240 V mode (US) split-phase? |
Answer: | NO. this inverter can't run in parallel |
Question: | Other versions of the 5kw show connected to generator in the ads will this one connect to an ac generator through the ac input? |
Answer: | YES. |
Question: | My volts on the multimeter read 103 volts coming from the solar panels(3 x 38 connected in series) will this work to charge? |
Answer: | YES. it is ok to charge your battery. |
Question: | Can this be used as a grid tie inverter to feed electricity back into the grid? |
Answer: | NO. This can't be used as a grid tie inverter |
Question: | what does the wifi module do? does it log data? can you adjust the settings? Is there any info on the software or app needed to interface? |
Answer: | Yes the wifi module can set up some data, there has an APP to download it. |
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
The 110V solar inverter is a new all-in-one hybrid mppt charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output.
It is a 48V 5kVA New All-in-One Hybrid Mppt Inverter with 500VDC 6kW PV input. Produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed.
Can be accessed to a variety of household appliances and office loads, power tools, industrial equipment, and electronic audio and video equipment, including refrigerators, lamps, televisions, fans, air conditioning and other AC loads
Features:
- Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
- Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
- Two output modes: mains bypass and inverter output; uninterrupted power supply.
- Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging, and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
- Advanced MPPT technology with an efficiency of 99.9%.
- Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
- Power saving mode available to reduce no-load loss.
- Intelligent variable speed fan to efficiently dissipate heat and extend system life.
- ON/OFF rocker switch for AC output control.
- Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
AC ( Utility/Grid)Mode:
- Rated input voltage:110/120Vac
- Max.AC Charge Current: 40A
- Input voltage range: (90Vac-140Vac) ±2>#/span###
- Frequency: 50Hz/ 60Hz (Auto detection)
- Frequency Range: 47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz);
- Overload/short circuit protection:Circuit breaker
- Efficiency : >95>#/span###
- Conversion time (Bypass and reverse): 10ms
- Reverse Flow Protection: Yes
- Max Bypass Current load: 63A
Inverter Mode:
Waveform: Pure sine wave
- Rated output power (W):5000VA/5000W (Power factor 1)
- Output AC Voltage:120V AC (100/105/110Vac Settable)
- Peak Power: 7000VA
- Output voltage error:±5>#/span###
- Output frequency range (Hz):50Hz ± 0.3Hz;60Hz ± 0.3Hz
- Efficiency> 95>#/span###
- Motor Capability: 3HP
- Output Short-circuit Protection: Breaker
- Bypass Breaker Specifications: 63A
- Rated Battery Voltage:48V (minimum start-up voltage 44V)
AC (Utility/Grid) charging
- Battery type: Lead acid or lithium battery
- Maximum charge current(can be set): 0-40A
- Charge current error: ± 5Adc
- Short circuit protection: Circuit breaker and blown fuse
- Circuit breaker specifications: 63A
- Overcharge protection: Yes; Automatically alerts and then turns off
Hybrid charging Max charger current specifications (AC charger+PV charger): 80A
Protection
- PV Current/Power Limiting Protection
- PV Night anti-charge protection
- Power Input Under voltage Protection
- Battery overvoltage/ low-voltage protection
- Load output short circuit protection
- Heat sink over temperature protection
- PV reverse polarity
- Charge short-circuit protection
PV (Solar) Charging
Max.PV open circuit voltage | 500Vdc |
PV operating voltage range | 120-450Vdc |
MPPT voltage Range | 120-450Vdc |
Max. PV Input Power | 6000W |
Max.PV Input Current | 16A |
Max.PV output power | 5000W |
Max. PV Charging Current | 80A |
Hybrid Charger Max Current | 80A (AC Charger+PV Charger ) |
Operating temperature range | -15°C to 55°C |
Certifications | CE(IEC62109), RoHS, EN61000 |
Weight | 25.6 lbs /11.6kg |
Heat dissipation | Forced air cooling, variable speed of fan |
PV Wring | 10AWG |
AC Input/Output Wiring | 7AWG |
Battery Wiring | 2AWG |
Size (L*W*D) | 16.8*12.7*4.9 in / 426*322*124 mm |
Battery Four Charging Mode:
- CSO: Solar energy will charge battery as priority. Utility will charge battery only when solar energy is not available.
- CUB: Utility will charge battery as priority. Solar energy will charge battery only when utility power is not available.
- SNU (Default): Solar energy and utility will charge battery at the same time.
- OSO: Solar energy will be the only charging source even if utility is available.
Three Load Working Mode:
- SOL: Solar energy provides power to the loads as priority, then Battery, then Utility AC power.
- UTI(Default): Utility will provide power to the loads as priority, then Solar and Battery power.
- SBU: Battery power load first, then Utility.
NOTE 1: This is a wide voltage Hybrid inverter, The voltage that starts to connect to the solar panel must be above 120V for the Hybrid inverter to work normally.
This off grid solar inverter all-in-one does not support parallel operation, and does not support phase separation!
AC Output Wiring NOTE:
- Only the Live and Neutral wires will be connected to the Output Terminal Block, the Ground will be connected to the screw terminal.
- Make sure any circuit breakers are disconnected and ensure the unit is in the off position.
- AC Output should NEVER be connected to public power/utility or a generator.
- There are two terminal blocks with “IN” and “OUT” markings. Please do NOT misconnect input and output connectors.
Warning:
- Never install the all-in-one solar charge inverter and lead-acid battery in the same confined space! Also do not install in a confined place where battery gas may collect.
- Ensure that there is enough air flowing through the heat sink, and space of at least 200m to the left and right air outlets of the inverter shall be left to ensure natural convection heat dissipation.
- This 5000W Solar Inverter is suitable for 48V battery banks systems ONLY!
- For PV to charge 48V battery banks, you will need a minimum PV Voc voltage of 120VDC.
- The bluetooth module has been discontinued, and the wifi module needs to be purchased separately!
- Does not support parallel!!