- Administrator reply
- Hello, our service will contact u soon.
PowMr 5500W All In One Solar Inverter Charger With MPPT 80A Solar Controller Battery Regulator DC 48V System Output AC 220V Max Input PV 500V Work Without Battery And Parallel 9 Unit Function WIFI
PowMr 48V DC to 220V-230V AC 5.5KW Solar Inverter+80Amp MPPT Charge Controller
This is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger, and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Features
- Pure sine wave inverter
- Inverter running without battery
- Built-in MPPT solar controller
- Configurable input voltage range for home appliances and personal computers via LCD setting
- Configurable battery charging current based on applications via LCD setting
- Configurable AC/Solar Charger priority via LCD setting
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload/ Over temperature/ short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
Pacakage including:
- The Solar all in one inverter x 1
- User manual(English) x 1
- Communication cable x 1
- Parallel communication cable x 1
Reminder: Only for US users
1. In the mains bypass mode, the device cannot be connected to two-phase 220V AC power, that is, L1-L2 cannot be connected to L-N.
2. In inverter mode, after the device is connected to two-phase 220V, please do not select the mains priority as the output priority, so as to avoid potential safety hazards for the device.
3. Do not connect the AC output end of the device to an autotransformer, so as not to affect the normal service life of the device.
Basic System Architecture
The following illustration shows the basic application for this inverter/charger. It also includes the following devices to
have a complete running system:
Generator or Utility.
PV modules (option)
Consult with your system integrator for other possible system architectures depending on your requirements.
This inverter can power all kinds of appliances in-home or office environment, including motor-type appliances such as tube lights, fans, refrigerators, and air conditioners.
Installation steps
| INTRODUCTIONThis is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.The most important thing is to have a unique parallel function! ! ! ! | Pakage
|
Five inverters in parallel
Multiple inverters in parallel
This inverter has a parallel function, which can be Two inverters in parallel; Three inverters in parallel; Four inverters in parallel; Five inverters in parallel; Six inverters in parallel; Seven inverters in parallel.... Up to nine inverters can be paralleled
Night inverters in parallel:
NOTE:
For parallel model installation and operation, please check the parallel installation guide for the details.
Support 3-phase equipment
Inverter parallel &two different operation modes.
- Parallel operation in single phase with up to 9 units. The supported maximum output power is 45KW/45KVA.
- Maximum nine units work together to support three-phase equipment. Seven units support onephase maximum. The supported maximum output power is 45KW/45KVA and one phase can be up to 35KW/35KVA.
NOTE:
- If this unit is bundled with share current cable and parallel cable, this inverter is default supported parallel operation.
- Do not connect the current sharing cable between the inverters which are in different phases. Otherwise, it may damage the inverters.
Line Mode Specifications | |
INVERTER MODEL | POW-HVM5.5K-48V-P (Parallel 9 unit) |
Input Voltage Waveform | Sinusoidal (utility or generator) |
Nominal Input Voltage | 230Vac |
Low Loss Voltage | 170Vac±7V (UPS) 90Vac±7V (Appliances) |
Low Loss Return Voltage | 180Vac±7V (UPS); |
100Vac±7V (Appliances) | |
High Loss Voltage | 280Vac±7V |
High Loss Return Voltage | 270Vac±7V |
Max AC Input Voltage | 300Vac |
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) |
Low Loss Frequency | 40±1Hz |
Low Loss Return Frequency | 42±1Hz |
High Loss Frequency | 65±1Hz |
High Loss Return Frequency | 63±1Hz |
Output Short Circuit Protection | Line mode: Circuit Breaker Battery mode: Electronic Circuits |
Efficiency (Line Mode) | >95% ( Rated R load, battery full charged ) |
Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) |
Inverter Mode Specifications | |
INVERTER MODEL | 5.5KVA |
Rated Output Power | 5.5KVA/5.5KW |
Output Voltage Waveform | Pure Sine Wave |
Output Voltage Regulation | 230Vac±5% |
Output Frequency | 60Hz or 50Hz |
Peak Efficiency | 94% |
Overload Protection | 5s@>140% load; 10s@100%~140% load |
Surge Capacity | |
Nominal DC Input Voltage | 48Vdc |
Cold Start Voltage | 46.0Vdc |
Low DC Warning Voltage | |
@ load < 20% | 44.0Vdc |
@ 20% < load < 50% | 42.8Vdc |
@ load > 50% | 40.4Vdc |
Low DC Warning Return Voltage | |
@ load < 20% | 46.0Vdc |
@ 20% < load < 50% | 44.8Vdc |
@ load > 50% | 42.4Vdc |
Low DC Cut-off Voltage | |
@ load < 20% | 42.0Vdc |
@ 20% < load < 50% | 40.8Vdc |
@ load > 50% | 38.4Vdc |
Charge Mode Specifications | |
Utility Charging Mode | |
INVERTER MODEL | 5.5KVA |
AC Charging Current (Max) | 80Amp (@ VI/P=230Vac) |
Bulk Charging Voltage | |
Flooded Battery | 58.4Vdc |
AGM / Gel Battery | 56.4Vdc |
Floating Charging Voltage | 54Vdc |
Overcharge Protection | 63Vdc |
Charging Algorithm | |
Solar Input | |
INVERTER MODEL | 5.5KVA |
Rated Power | 5500W |
Max. PV Array Open Circuit Voltage | 500VDC |
PV Array MPPT Voltage Range | 120-450VDC |
Max. Input Current | 18A |
General Specifications | |
INVERTER MODEL | 5.5KVA |
Safety Certification | CE |
Operating Temperature Range | -10°C to 55°C |
Storage temperature | -15°C to 60°C |
Humidity | 5% to 95% Relative Humidity (Non-condensing) |
Dimension (D*W*H), mm | 448x295x105 |
Net Weight, kg | 9.9 |
- No Lithium Batteries Activation
- 48V
- Lithium Batteries
- Flooded Batteries
- AGM Batteries
- High frequency Inverters
- Single Phase
- Parallel Single for Three Phase
- 230Vac±5%
- 5500W
- 450V-500V
- build-in MPPT Solar Charge Controller
- 5500W
- 80 Amps
- 80amps
- 80Amps
- Wifi Module(Optional)
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon
PowMr 48V DC to 220V-230V AC 5.5KW Solar Inverter+80Amp MPPT Charge Controller
This is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support with portable size for your off grid system.
Feartures:
- Pure sine wave inverter
- Support running without battery
- Built-in MPPT solar controller
- Support 48V Lead Acid(AGM, Flooded, User-defined,) & Lithium battery &Li Ion battery
- Configurable input voltage range for home appliances and personal computers via LCD setting
- Configurable battery charging current based on applications via LCD setting
- Configurable AC/Solar Charger priority via LCD setting
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload/ Over temperature/ short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Support connected in parallel with two different modes, Parallel operation in single phase up to 9 units, or max 9 units work together to support three-phase equipment.


Specifications
Line Mode Specifications
Input Voltage Waveform Sinusoidal (utility or generator)
Connection

Warm Tips
AC input/output connection
Please follow below steps to implement AC input/output connection:
- Before making AC input/output connection, be sure to open DC protector or disconnector first.
- Remove insulation sleeve 10mm for six conductors. And shorten phase L and neutral conductor N 3 mm.
- Insert AC input wires according to polarities indicated on terminal block and tighten the terminal screws. Be sure to connect PE protective conductor first.
- Then, insert AC output wires according to polarities indicated on terminal block and tighten terminal screws. Be sure to connect PE protective conductor first.
- Make sure the wires are securely connected.
CAUTION: Important
- Be sure to connect AC wires with correct polarity. If L and N wires are connected reversely, it may cause utility short-circuited when these inverters are worked in parallel operation.
- Appliances such as air conditioner are required at least 2~3 minutes to restart because it’s required to have enough time to balance refrigerant gas inside of circuits.
- This 5500W inverter is single phase inverter,support 48V battery only, support parallel
Warm tip:The correct configuration of the battery capacity of the system is determined according to the specific use requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult us.
5500W Solar Inverter support parallel
This inverter can be used in parallel with two different operation modes.
1. Parallel operation in single phase with up to 9 units. The supported maximum output power is 45KW/45KVA.
2. Maximum nine units work together to support three-phase equipment. Seven units support onephase maximum. The supported maximum output power is 45KW/45KVA and one phase can be up to 35KW/35KVA.
NOTE:
- If this unit is bundled with share current cable and parallel cable, this inverter is default supported parallel operation.
- For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit. Be sure to install each unit in the same level.
- Be sure the length of all battery cables is the same. Otherwise,there will be voltage difffference between inverter and battery to cause parallel inverters not working.
Parallel Operation in Single phase
Two inverters in parallel:
Power Connection:
Three inverters in parallel:
Power Connection:
Four inverters in parallel:
Power Connection:

Five inverters in parallel:
Power Connection:
Six inverters in parallel:
Power Connection:


Seven inverters in parallel:
Power Connection: