PowMr 24V DC 3KW Hybrid Solar All In One Inverter Charge Compatible PWM 50A Solar Charge Controller With LCD Display Pure Sine Wave Inverter 3000w
This PowMr off-grid all in one Hybrid solar inverter can power all kinds of appliances in-home or office environments, including motor-type appliances such as tube lights, fans, refrigerators, and air conditioners.
Features:
- Configurable input voltage range for home appliances and personal computers via LCD setting
- Configurable battery charging current based on applications via LCD setting
- Configurable AC/Solar Charger priority via LCD setting
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering,Cold start function
- Overload/ Over temperature/ short circuit protection
- Smart battery charger design for optimized battery performance Cold start function
Communication Connection
- Please use supplied communication cable to connect to inverter and PC. Insert bundled CD into a computer and follow the on-screen instruction to install the monitoring software. For the detailed software operation, please check the user manual of the software inside of the CD.
Reminder: Only for US users
1. In the mains bypass mode, the device cannot be connected to two-phase 220V AC power, that is, L1-L2 cannot be connected to L-N.
2. In all in one inverter mode, after the device is connected to two-phase 220V, please do not select the mains priority as the output priority, so as to avoid potential safety hazards for the device.
3. Do not connect the AC output end of the device to an autotransformer, so as not to affect the normal service life of the device.
Package:
- 3000W 24V Soalr Inverter 230V x 1,User manual x 1,
- Communication cable x1, Software CD x 1,DC Fuse x 1, Ring terminal x 1,Strain relief plate x 2
Dimension (D*W*H): 334*285*100 mm
Output source priority: To configure load power source priority(Selectable option)
- Solar first: Solar energy provides power to the loads as first priority.
If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.
- Utility first (default): Utility will provide power to the loads as first priority.
Solar and battery energy will provide power to the loads only when utility power is not available.
- SBU priority: Solar energy provides power to the loads as first priority.
If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.
Input Voltage Waveform: Sinusoidal (utility or generator)
- Nominal Input Voltage: 230V AC
- Low Loss Voltage: 170Vac±7V (UPS); 90Vac±7V (Appliances)
- Low Loss Return Voltage:180Vac±7V (UPS); 100Vac±7V (Appliances)
- High Loss Voltage:280Vac±7V
- High Loss Return Voltage:270Vac±7V
- Max AC Input Voltage:300V AC
- Nominal Input Frequency:50Hz / 60Hz (Auto-detection)
- Output Short Circuit Protection: Circuit Breaker
- Output power derating: When AC input voltage drops to 170V, the output power will be derated.
Inverter Mode Specifications:
- Output Voltage Waveform:Pure Sine Wave
- Output Voltage Regulation:230Vac±5>#/u###
- Output Frequency:50Hz
- Peak Efficiency:93>#/span###
- Overload Protection:5s @≥150% load; 10s @105%~150% load
- Nominal DC Input Voltage:24Vdc
- Cold Start Voltage:23.0Vdc
- Low DC Warning Voltage:@ load < 50%:23.0Vdc, @ load ≥ 50%:22.0Vdc
- Low DC Warning Return Voltage:@ load < 50%:23.5Vdc, @ load ≥ 50%:23Vdc
- Low DC Cut-off Voltage:@ load < 50%:21.5Vdc, @ load ≥ 50%:21Vdc
- High DC Recovery Voltage: 32Vdc
- High DC Cut-off Voltage: 33Vdc
- No Load Power Consumption<25W
PWM Solar Charging Mode :
- INVERTER MODEL: 3KVA(3000W)
- Open circuit Voltage (Voc) of PV modules does not exceed the max. PV array open-circuit voltage of the inverter.
- Charging Current(PWM): 50Amp
- System DC Voltage: 24V dc
- Operating Voltage Range: 30~32V dc
- Max. PV Array Open Circuit Voltage: 80Vdc
- Max Charging Current (AC charger plus solar charger):70Amp
Charge Mode Specifications:
- Utility Charging Mode
- Charging Algorithm: 3-Step
- AC Charging Current (Max): 25 Amp (@VI/P=230Vac)
- Bulk Charging Voltage: 29.2V (Flooded), 28.2V(AGM / Gel )
- Floating Charging Voltage: 27Vdc
PowMr all in one solar inverter 5000 watts can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc.
Single Phase 230V Output, don't support 110V
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY !!!
NOTE:
- Before using the unit, read all instructions and cautionary markings on the unit, the batteries, and all appropriate sections of this manual.
- CAUTION --To reduce the risk of injury, charge only deep-cycle lead-acid type rechargeable batteries. Other types of batteries may burst, causing personal injury and damage.
- NEVER charge a frozen battery!!!
- For optimum operation of this inverter/charger, please follow the required spec to select the appropriate cable size. It’s very important to correctly operate this inverter/charger.
- One piece of 150A fuse is provided as over-current protection for the battery supply.
- This PowMr off-grid solar inverter all-in-one does not support parallel operation, and does not support phase separation!
- (Single phase 220V AC /A Hot Leg, NOT Support 110V !!! )
SPECIFICATIONS
Table 1 Line Mode Specifications
INVERTER MODEL |
1KVA |
2KVA |
3KVA |
3KVA Plus |
5KVA |
|||
Input Voltage Waveform |
Sinusoidal (utility or generator) |
|||||||
Nominal Input Voltage |
230Vac |
|||||||
Low Loss Voltage |
170Vac±7V (UPS); |
|||||||
Low Loss Return Voltage |
180Vac±7V (UPS); |
|||||||
High Loss Voltage |
280Vac±7V |
|||||||
High Loss Return Voltage |
270Vac±7V |
|||||||
Max AC Input Voltage |
300Vac |
|||||||
Nominal Input Frequency |
50Hz / 60Hz (Auto detection) |
|||||||
Low Loss Frequency |
40±1Hz |
|||||||
Low Loss Return Frequency |
42±1Hz |
|||||||
High Loss Frequency |
65±1Hz |
|||||||
High Loss Return Frequency |
63±1Hz |
|||||||
Output Short Circuit Protection |
Circuit Breaker |
|||||||
Efficiency (Line Mode) |
>95% ( Rated R load, battery full charged ) |
|||||||
Transfer Time |
10ms typical (UPS); 20ms typical (Appliances) |
|||||||
When AC input voltage drops to 170V, the output power will be derated. | ![]() |
Table 2 Inverter Mode Specifications
INVERTER MODEL | 1KVA | 2KVA | 3KVA | 3KVA Plus | 5KVA |
Rated Output Power | 1KVA/1KW | 2KVA/2KW | 3KVA/3KW | 5KVA/5KW | |
Output Voltage Waveform | Pure Sine Wave | ||||
Output Voltage Regulation | 230Vac±5% | ||||
Output Frequency | 50Hz | ||||
Peak Efficiency | 93% | ||||
Overload Protection | 5s@≥150% load; 10s@105%~150% load | ||||
Surge Capacity | 2* rated power for 5 seconds | ||||
Nominal DC Input Voltage | 12Vdc | 24Vdc | 24Vdc | 48Vdc | |
Cold Start Voltage | 11.5Vdc | 23.0Vdc | 23.0Vdc | 46.0Vdc | |
Low DC Warning Voltage | 23.0Vdc | 46.0Vdc | |||
11.5Vdc | 23.0Vdc | ||||
Low DC Warning Return Voltage | 23.5Vdc | 47.0Vdc | |||
11.7Vdc | 23.5Vdc | ||||
Low DC Cut-off Voltage | 21.5Vdc | 43.0Vdc | |||
10.7Vdc | 21.5Vdc | ||||
High DC Recovery Voltage | 15Vdc | 30Vdc | 32Vdc | 62Vdc | |
High DC Cut-off Voltage | 16Vdc | 31Vdc | 33Vdc | 63Vdc | |
No Load Power Consumption | <25W | <55W |
Table 3 Charge Mode Specifications
INVERTER MODEL | 1KVA | 2KVA | 3KVA | 3KVA Plus | 5KVA |
Safety Certification | CE | ||||
Operating Temperature Range | -10°C to 50°C | ||||
Storage temperature | -15°C~ 60°C | ||||
Humidity | 5% to 95% Relative Humidity (Non-condensing) | ||||
Dimension (D*W*H), mm | 88 x 225 x 320 | 100 x 285 x 334 | 100 x 300 x 440 | ||
Net Weight, kg (PWM model) | 5.0 | 5.5 | 6.3 | N/A | 8.5 |
Net Weight, kg (MPPT model) | N/A | N/A | 6.5 | 9.5 | 9.7 |
- No Lithium Batteries Activation
- 24V
- Flooded Batteries
- Gel Batteries
- Lead-acid Batteries
- User Mode
- High frequency Inverters
- Single Phase
- 230Vac±5%
- 3000W
- 75V-96V
- build-in PWM Solar Charge Controller
- 1200W
- 25 Amps
- 50amps
- 70Amps
- No Wifi/Bluetooth Module
- GER Warehouse
- USA Warehouse
Q:
- is it possible to work on grid?
- is it possible to work in island?
- is it possible to work without batteries ?
A:
- is it possible to work on grid? This is an off-grid inverter, can't work on the grid.
- is it possible to work in island? This is an off-grid inverter, if there is no PV and Utility input , all of them will cut-off
- is it possible to work without batteries? This model work with battery. if you want without model,we have another model.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- https://powmr.com/inverters/all-in-one-inverter-chargers/powmr-3kva-24v-output-ac-220v-2400w-solar-inverter-charger/ You may consider this model
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Hello, our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.
- Administrator reply
- Our service will contact u soon.