PowMr Remote Meter for K100 PRO

PowMr Auto 12/24VDC 100A MPPT Solar Charge Controller Remote Meter LCD Display With 0 Layer Pricnciple Operating Model

Overview

MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%.

Features

• Brand: PowMr
• Product Model: K100 PRO-Meter
• Romote Meter LCD Display
• All the Various Real-time data show on one display ,Convenient user to check( 0 Layer Pricnciple Operating Model )
• Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
• Ultra-fast tracking speed and guaranteed tracking efficiency.
• 12/24VDC automatically identifying system voltage.
• LCD panel display design, dynamically displaying tool‟s operating data and working condition.
• Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
• Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries.
• Battery temperature compensation function.
• Multiple load work modes
• Application Scenario: Household system, monitoring system, base station, street lighting system, small power stations, etc.
• This solar charge controller with three time function.

A: time (night working) B: period (pause) C: time slot (dawn working)

Installation Instructions

Installing wires, first loosen the screw counter clockwise

• Prepare complete installation tools, materials and cable. Please matching suitable cable.
• ensure that the current density <4A/mm² This will help reduce the line pressure drop. Check the installation site meets the relevant safety requirements, avoid damp, dusty, flammable, explosive and corrosive gases
• Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing. In order to ensure a good controller cooling conditions, the controller on the bottom of each reserved 10cm space
• As shown on the right wiring sequence: load, battery, solar. Battery plate is connected to the controller to be taken to ensure that the load, battery. The polarity of the solar cell panel and controller.
• Warning: to prevent accidents (high pressure or high temperature), non professionals can not engage in loading and unloading operations.
• Be very careful when installing the batteries, especially flooded lead-acid battery. Please wear eye protection, and have fresh water available to wash and clean any contact with battery acid.
• Keep the battery away from any metal objects, which may cause short circuit of the battery.
• The controller requires at least 150mm to 300mm of clearance above and below for proper air flow, ventilation heat dissipation fan is highly recommended if mounted in a sealed enclosure.

Content Included

• 1X MPPT Romove LCD Display
• 1XCable(2meter)
• 1X English User Manual