Feature
1. Installation
① Align the interface of the Wi-Fi Plug07 with the inverter and plug it in tightly.
② Confirm the status of the LED indicator (When you saw the green LED light turn on from the shell, showing the normal working status)
2.Wireless Router Connection
2.1 Download APP and Wi-Fi connnection
① Scan the QR Code from the cover of this guideline and download the APP.
② Select the same number of Wi-Fi Plug07 PN to connect on your phone WLAN. (Initial Password:12345678)
2.2 Wi-Fi Config
① Open the APP, Tap the Wi-Fi Config button to enter this page.
② Then tap the Network Setting button.
2.3 Network Setting
① According to the prompts, type in the information to finish the network setting.
② After the Wi-Fi Plug07 is restarted, reconnect the Wi-Fi which connected by step 2.1.
3.Create Account And Datalogger
3.1 Create Account
① Open the APP, tap the Register button.
② According to the prompt information, complete creating an account.
3.2 Add Datalogger
① Login the account and click the list button on the bottom of the home page.
② Tap the “＋” button on the top-right corner of the list page.
③ Scan the datalogger PN on the Wi-Fi Plug07, or input it manually.
④ According to the prompts, type in the information to finish add datalogger.
| type | POW-30AH-12.8V | POW-50AH-12.8V | POW-100AH-12.8V |
| Nominal voltage | 12.8V | 12.8V | 12.8v |
| Rated capacity | 30Ah(0.2C/25)℃(Min:29Ah) | 50Ah(0.2C/25)℃(Min:49Ah) | 100Ah (0.2C/25°C) (Min:96Ah) |
| Operating voltage range | 10V-14.6V(Typical:12.8V) | 10V-14.6V(Typical:12.8V) | 10V~14.6V (Typical:12.8V) |
| Charging voltage | 14.6V | 14.6V | 14.6v |
| Dischange cut -off voltage | 10V | 10V | 10v |
| Charging current(Max) | 15A | 25A | 50A |
| Dischange current (Max) | 30A | 50A | 100A |
| Length | 195mm | 228mm | 325mm |
| Width | 133mm | 138mm | 170mm |
| Height | 171mm | 210mm | 215mm |
| Weight | about 4.5kg | about 6.2kg | About 11.5kg |
| Shell | Plastics/Black | Plastics/Black | Plastics/Black |
| Series | Maximum support for 4 sets in series | Maximum support for 4 sets in series | Maximum support for 4 sets in series |
| Parallel | support | support | Support |
| Alarm&potection | Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc | Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc | Over Voltage, Under Voltage, Over Current, Short Circuit etc. |
| Cooling mode | Automatic cold and hot | Automatic cold and hot | Automatic cold and hot |
| Terminal stud | M6 | M8 | M8 |
| Altitude | ≤4000m | ≤4000m | <4000m |
| Recommended operating charge temperature | 15℃-40℃ | 15℃-40℃ | 15%~85% |
| Recommended operating dischage temperature | 15℃-40℃ | 15℃-40℃ | 0°C~50°C |
| Recommended operating storagetemperature | -20℃-45℃ | -20℃-45℃ | -10°C~60°C |
| Humidity | 15%-85% | 15%-85% | 15°C~40°C |
| Operating Charge temperature | 0℃-50℃ | 0℃-50℃ | 15°C~40°C |
| -10Operating Dischage temperature | -10℃-60℃ | -10℃-60℃ | -20°C~45°C |
| Question: | Is there a way to fix the battery state of charge, it is reading incorrectly? |
| Answer: | disconnect all the wiring. wait about 20 mins, wire your battery to inverter again. |
- Comentario
the datalogger address does not work
- Comentario
B09ND8W3JV
- Administrator reply
- Hello, our service will contact u soon.
- Comentario
the datalogger address does not work
- Administrator reply
- Our service will contact u soon
- Comentario
- Administrator reply
- Our service will contact u soon
- Comentario
Our company makes delivery all over the world
We only offer quality goods with higher cost performance
You have 30 days to test your purchase
© 2017 - 2023 PowMr. All Rights Reserved.
