PowMr 1 Pair Y Branch Connectors - Y Connectors, in Pair MMF+FFM for Parallel Connection Solar PV Connector Y2-B2
PowMr 1 Pair Y Branch Connectors - Y Connectors, in Pair MMF+FFM for Parallel Connection
PowMr Solar PV Connector:
This connector is approved by CE, TUV is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. For permanent installations.
Why would you choose the PowMr Solar PV Connectors?
PowMr Cable Connectors are made from high-quality PPO materials to ensure long-term durability (compare to the cheap sheet metal pin), PPO materials have advantages that sturdy, impact, corrosion-resistant with a high ignition point Ensure service life and safety performance.
With excellent aging resistance and UV endurance, it can be used in a harsh environment.
Insulation Material: PPO Rated Current: 20A(4mm²）
Rated Voltage: DC1000V
Contact Resistance: ≤5mΩ
Insulation Resistance: >500mΩ
Operating Temperature range: -40℃ until+90℃
Degree of Protection: IP67
Flame Class: UL94-V0
Safety Degree: Ⅱ
Suitable Single Core Cable Section: 1.5mm² -- 6mm² ( include AWG14, AWG13,AWG12, AWG11,AWG10 )
1 Pair Solar PV Connector
*branch Connectors Conductor pin is tinned Copper: made of PPO + PA material. It makes a rock-solid connection after you crimp the pin to the wire, and these are operated perfectly under heavy load
*UL certification y branch connector Rated Current: 30A; Rated voltage: TUV 1000V DC / UL 600V DC; These connectors Hard plastic IP67 Waterproof and resist dust build-up. Widely Operating Temperature range: -40℉ until 185℉, fireproof, and Lower contact resistance.
*This y cable is designed to complete a solar panel (PV) array, typically in parallel applications. Red to red, black to black, Better to recognize polarity.
*UL certification fastness of male and female points with a stable self-locking system that is easy to lock and open. anti-aging and resistance to ultraviolet radiation.
|Rated capacity||30Ah(0.2C/25)℃(Min:29Ah)||50Ah(0.2C/25)℃(Min:49Ah)||100Ah (0.2C/25°C) (Min:96Ah)|
|Operating voltage range||10V-14.6V(Typical:12.8V)||10V-14.6V(Typical:12.8V)||10V~14.6V (Typical:12.8V)|
|Dischange cut -off voltage||10V||10V||10v|
|Dischange current (Max)||30A||50A||100A|
|Weight||about 4.5kg||about 6.2kg||About 11.5kg|
|Series||Maximum support for 4 sets in series||Maximum support for 4 sets in series||Maximum support for 4 sets in series|
|Alarm&potection||Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc||Over Voltage ,Under Voltage ,Over Current,Short Circuit,etc||Over Voltage, Under Voltage, Over Current, Short Circuit etc.|
|Cooling mode||Automatic cold and hot||Automatic cold and hot||Automatic cold and hot|
|Recommended operating charge temperature||15℃-40℃||15℃-40℃||15%~85%|
|Recommended operating dischage temperature||15℃-40℃||15℃-40℃||0°C~50°C|
|Recommended operating storagetemperature||-20℃-45℃||-20℃-45℃||-10°C~60°C|
|Operating Charge temperature||0℃-50℃||0℃-50℃||15°C~40°C|
|-10Operating Dischage temperature||-10℃-60℃||-10℃-60℃||-20°C~45°C|