PowMr Max PV 145VDC 220VAC 1KW To 5KW Hybrid Solar Inverter Charger With Parallel Function MPPT 80A 120A Solar Charger
PowMr Max PV 145VDC 220VAC 1KW To 5KW Hybrid Solar Inverter Charger With Parallel Function MPPT 80A 120A Solar Charger
This hybrid PV inverter can provide power to connected loads by utilizing PV, utility, and battery power.
Depending on different power situations, this hybrid inverter generates continuous power from PV solar modules (solar panels), batteries, and the utility. When the MPP input voltage of PV modules is within an acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge the battery. Galvanic isolation was designed between PV/DC and AC output, so users could connect any type of PV array to this Hybrid inverter. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter.
Overview:
Quick Details | |||
Place of Origin: | Guangdong, China | Brand Name: | PowMr |
Model Number: | POW-E-1KW-5KW | Input Voltage: | 1~2KW-24VDC; 3~5KW-48VDC |
Output Voltage: | 230VAC | Output Current: | 1~4KW-80A ; 5KW-120A |
Output Frequency: | 50/60Hz | Output Type: | Single |
Size: | 115*300*400mm | Type: | DC/AC Inverters |
Inverter Efficiency: | >95% | Certificate: | CE |
Warranty: | 2 years | Weight: | 8-16kg |
Model: | Voltronic brand 1-5KW inverter charger | Input model: | PV, Utility, or generator |
PV charge current: | 1~4KW-80A ; 5KW-120A | Max PV array input voltage: | 145V |
Max PV power: | 1000W-6000W | MPPT Range: | 15V-115V |
AC charge current: | 60A | Output Voltage Waveform: | Pure Sine Wave |
Communication: | USB/RS232/Dry-contact | Efficiency: | 93% |
Feature:
- PV connectors
- AC output connectors (Load connection)
- Battery connectors
- AC Grid connectors (Connect to SPD)
- RS-232 communication port
- USB communication port
- Intelligent slot
- DC Switch (option)
- LCD display panel
- LED indicators
- Operation buttons(Please check section 14 for details about LCD display, LED indicators, and button operation)Operation buttons.
Battery Connection:
CAUTION: For safety operation and regulation compliance, it’s requested to install a separate DC over-current protector or disconnect the device between battery and inverter. It may not be requested to have a disconnect device in some applications, however, it’s still requested to have over-current protection installed. Please refer to the typical amperage in the below table as the required fuse or breaker size.
WARNING! All wiring must be performed by qualified personnel.
WARNING! It's very important for system safety and efficient operation to use the appropriate cable for battery connection. To reduce the risk of injury, please use the proper recommended cable and terminal size as below.
Recommended battery cable and terminal size:
PV Module Selection:
When selecting proper PV modules, please be sure to consider the below parameters:
1. Open circuit Voltage (Voc) of PV modules does not exceed the max. PV array open-circuit voltage of the inverter.
2. Open circuit Voltage (Voc) of PV modules should be higher than min. battery voltage.
Please read the specification carefully before install

No reviews found