This off-grid PV 5000 Watts solar hybrid inverter can provide power to connected loads by utilizing PV power, utility power, and battery power.
Depending on different power situations, this inverter is designed to generate continuous power from PV solar modules (solar panels), batteries, and the utility. When the MPP input voltage of PV modules is within an acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge the battery. Galvanic isolation was designed between PV/DC and AC output so that users could connect any type of PV array to this inverter. See Figure 1 for a simple diagram of a typical solar system with this inverter.
| Quick Details | |||
| Place of Origin: | Guangdong, China | Brand Name: | PowMr |
| Model Number: | POW-MKS III-5K-48V-P | Input Voltage: | 48VDC |
| Output Voltage: | 220VAC | Output Current: | 100A |
| Output Frequency: | 50/60Hz | Output Type: | Single |
| Type: | DC/AC Inverters | Inverter Efficiency: | >95% |
| Certificate: | CE | Warranty: | 2 years |
| Weight: | 13.5kg | Application: | Solar Power System |
| Lithium Battery Activation: | No | Battery Type: | Lithium Batteries, Flooded Batteries, AGM Batteries, User Mode |
| Inverter Type: | High-frequency Inverter | Phase: | Single Phase, Parallel Single for Three Phase |
| Max Solar Panel Input Power: | 5000W | Wifi/BLE Module: | Wifi Module(Optional) |
| Rated Output Power: | 5KVA/5KW | Parallel Capability: | Yes, up to 9 units |
| Max Panel Input Volt: | 450V-500V |
How to correctly match the battery capacity of the system is determined according to the specific usage requirements of the load and application scenarios, otherwise, it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
Please read the specification carefully before install
Specification
| INVERTER MODEL | POW-MKS III-5K-48V-P |
| Rated Output Power | 5KVA/5KW |
| Output Voltage Waveform | Pure Sine Wave |
| Output Voltage Regulation | 230Vac±5% |
| Output Frequency | 60Hz or 50Hz |
| Peak Efficiency | 90% |
| Overload Protection | 5s@≥150% load; 10s@110%~150% load |
| Surge Capacity | 2* rated power for 5 seconds |
| Nominal DC Input Voltage | 48Vdc |
| Cold Start Voltage | 46.0Vdc |
| Low DC Warning Voltage | |
| @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50% | 44.0Vdc 42.8Vdc 40.4Vdc |
| Low DC Warning Return Voltage | |
| @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50% | 46.0Vdc 44.8Vdc 42.4Vdc |
| Low DC Cut-off Voltage | |
| @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50% | 42.0Vdc 40.8Vdc 38.4Vdc |
| High DC Recovery Voltage | 64Vdc |
| High DC Cut-off Voltage | 66Vdc |
- Comment
Our company makes delivery all over the world
We only offer quality goods with higher cost performance
You have 30 days to test your purchase
© 2017 - 2022 PowMr. All Rights Reserved.
