PowMr 40A MPPT Solar Charge Controller 12V 24V 36V 48V Auto Solar Regulator with LCD Display MPPT-40A

Free shipping

List price: $80.66
$72.99
You save: $7.67 (10%)
Price in points: 73 points
MPPT-40A
In stock
+
Minimum quantity for "PowMr 40A MPPT Solar Charge Controller 12V 24V 36V 48V Auto Solar Regulator with LCD Display MPPT-40A" is 1.

PowMr 40A MPPT Solar Charge Controller 12V 24V 36V 48V Auto Solar Regulator with LCD Display MPPT-40A


Warming tips:

Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 times of Battery voltage will be the best efficiency



  • • 100% MPPT controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%
  • • Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V
  • • Battery options:Vented,Sealed,Gel, NiCd, Lithium battery.Dynamic large icon display PV and Battery status,working mode: Night mode, no charging, MPPT mode, Absorption mode, Floating mode and troubleshooting prompts.
  • • Excellent heat dissipation protection: Intelligence Fan-on temperature >45℃
  • • Large four big button, easy to use, more conveniently.


MPPT-40AWarming tips: Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 times of Battery voltage will be the best efficiency.

Feature:

*Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
*Selectable battery type Vented/ Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
*Soft start time ≤1S
Dynamic response and recovery time 100us
Max efficiency ≥98.1%
*PV utilization ≥99%

Input specification:

12V system: DC20V~DC80V
24V system: DC37V~DC105V
36V system: DC50V~DC160V
48V system: DC72V~DC160V

The maximum PV input voltage (Voc):DC190V
(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)

The maximum PV input power
(The total power rated of PV can’t be over this watt that will break the controller.)
12V system (480W) ;
24V system (960W) ;
36V system (1400W);
48V system (1700W) ;

Output specification

Overcharging protection voltage:
12V system (15V);
24V system (30V);
36V system (45V);
48V system (60V);

Air circuit breaker and wires requirement

copper wires:9AWG
air circuit:63A

Notes: The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.

Package including:

1XMPPT 40amp Solar Charge Controller
1XEnglish Manual



User Manual--- (PowMr_MPPT_30-60A_User_Manual.pdf, 902 Kb) [Download]

No posts found

Write a review

Please confirm the specification before install